Search Machinery

Lathe, 0.6m~(23.6"~)

SEARCH FILTER

1 ~ 6 of 6 POST

DLZ 630

Max. work-piece diameter over bed: -Nominal: 630 mm -Max.: 660 mm Max. work-piece diameter over support: -At short slides: 400 mm -At long slides: 320 mm Max. work-piece diameter in a notch in front of a faceplate: 720 mm Length of a notch in front of a faceplate: 265 mm Height of centers: -Over bed: 305 mm -Over floor level: 1125 mm Bed width: 550 mm Working spindle bore: 72 mm Faceplate: -Diameter: 630 mm -Width: 120 mm Transversal section of the cutter: -Width: 40 mm -Height: 40 mm Side length of the tool holder: 200 mm Number of revs of the main electric motor: 1400 rpm Number of spindle speeds: 18 Max. allowable number of faceplate revs: 560 rpm Feeds: -Longitudinal feeds: -Number: 68 -Range: 0,035-10 mm/rev -Transversal feeds: -Number: 68 -Range: 0,014-4 mm/rev Speed of rapid stroke: -Longitudinally: 5000 mm/min -Transversely: 2000 mm/min Thread: -Step: -Number: 84 -Range: 0,2-224 mm -Inch: -Number: 94 -Range: 140-1/8 threads per inch -Module: -Number: 72 -Range: 0,1-112 -Pitch: -Number: 94 -Range: 280-1/4 Machine dimensions: -Length: 2300 (+ distance between centers) mm -Width: 1850 mm -Height: 1725 mm

HOWA

Swing Over Bed : 400 Swing Over Cross Slide : 260 Center to Center : 650 Width : 330

SELLER : Wijaya Machinery

SC:-

ID:#340

HOWA

ST-650

1978

φ430×650 80~2000rpm(8 steps) Boreφ52 8 inch chuck

SC:950904KIY-79

ID:#9768

MAZAK

MAZAK-ACE

39~1500rpm chuck:3-jawφ200 hole diameterφ50 Swing: over bed φ460 Tool postφ200

SC:N1683

ID:#5268

TUDA

PROS 400x620

60-1500rpm(8-gears) Spindle hole diameter: φ57mm

SELLER : Aim SSK Co.Ltd

SC:MA200911-01

ID:#9681

TUDA

TSL-620

Turning speed:52~1620rpm chuck: 3-jawφ230 hole diameter:φ65 Hole through diameter:φ50 Swing : over bed:φ440 Tool post:φ160

SC:N3184

ID:#5269

{{ contactModal.id }} {{ contactModal.companyname }} {{ contactModal.title }} {{ contactModal.stockCode }} {{ contactModal.telephone }} {{ contactModal.inCharge }}
prev Next