Capacity: 630 tons Slide stroke: 200 mm Press weight: 35 tons

Force 630 ton Stroke 800 mm Table size 1120 x 1250 mm Demensions 2580 x 2180 x 6900 mm Weight 50 ton

S:140 50spm DH:350 Adj:15 SL:300*400 BL:400*500

Force: 1000 ton Stroke: 170 mm Number of strokes per minute: 32 Shut height: 470 mm Adjustment: 16 mm Table size: 800 x 800 mm Bolster plate thickness: 140 mm Bottom ejector: -Stroke: 110 mm -Force: 320 kN Top ejector: -Stroke: 10 mm -Force: 100 kN Main motor: 40 kW, 380 V Overall dimensions: 2950 x 1950 x 4090 mm Weight: 26 tons

Capacity 600 ton Stroke 80 mm Strokes per minute 45 Shut height 280 mm Weight 12,2 ton The Cincinnati HME K600 stamping press is specially designed for minting coins and medals. The Cincinnati HME K600 is the optimal solution for a wide range of operations: stamping, embossing, molding and calibration. With a force of 600 tons, the press can be used to work with a variety of materials, including hard alloys.The Cincinnati HME K-Series presses are designed and built with a high degree of accuracy and reliability. The compact bed design minimizes deflection and ensures maximum accuracy due to even load distribution, while preloaded linear bearings provide directional sliding to facilitate precise alignment. Pneumatic balancing of the slider, precise adjustment of the closed height with the help of an electric drive ensure high print accuracy. Specifications: force 600 tons, stroke 90 mm, 45 strokes per minute, Closed height 280 mm. Friction clutch. Full set, good working condition.

Force 1600 ton Number of strokes per minute 90 Ram stroke 280 mm Shut height 1000 mm Table 1120 x 1250 mm Main motor 90 Kw

Force 1000 ton Stroke 240 mm Table 1000 x 900 mm Slide 800 x 800 mm SPM 100 Die Height 650 mm Adjustment 10 mm

Nominal force 4000 ton Slide stroke 400 mm Number of slide continuous strokes per minute 50 Shut height (distance between bed in top position and slide bolster plate stroke down) 1000 mm Bed adjustment 15 mm Distance between uprights clear 1660 Slide dimensions ? left-to-right 1420 mm ? front-to-back 1420 mm Bed dimensions ? left-to-right 1570 mm ? front-to-back 1620 mm Upper knockout stroke 60 mm Down knockout stroke 125 mm Uprights openings dimensions ? width 770 mm ? height 995 mm Main motor power 185 kW Overall dimensions ? left-to-right 6100 mm ? front-to-back 4710 mm ? height 8680 mm Height above floor level 6820 Mass 400 ton

Force 6300 ton Slider stroke length 460 mm Number of courses of a slider per minute 40 Shut height 1150 mm Adjustment of a table on height 15 mm Table overall dimensions depth 1950 mm width 1900 mm The size of a slider depth 1680 mm width 1680 mm Force of the top ejector 10 ton Force of the bottom ejector 16 ton Main electric motor power 400 kW Number of turns of the electric motor 590 rpm Machine overall dimensions length 8600 mm width 5900 mm height 12700 mm Press weight 634450 kg

Rated capacity: 6300 ton Slide stroke: 460 mm Slide strokes per minute (continuous): 40 Shut height: 1150 mm Adjustable distance between table and slide: 15 mm Distance between uprights clear: 1950 mm Table working surface: -L-to-R: 1600 mm -F-to-B: 1900 mm Slide dimensions: -L-to-R: 1680 mm -F-to-B: 1680 mm Top ejector stroke: 100 mm Bottom ejector stroke: 230 mm Uprights openings dimensions: -Width: 1100 mm -Height: 1250 mm Main drive motor power: 400 kW Overall dimensions: -L-to-R: 8600 mm -F-to-B: 5900 mm -Height above floor level: 9300 mm Weight: 658 ton

Capacity: 4000 ton Ram stroke: 400 mm Number of ram strokes: 50/1 min Width between uprights: 1500 mm Shut height: 1400 mm Ram adjustment: 20 mm Table size: 1120x1600 mm Slide size: 1320x1320 mm Press height above floor: 7315 mm Press dimension: -Height: 8870 mm -Width: 6280 mm -Length: 4885 mm Main drive motor output: 220 kW Press weight: 285 ton

Manufacturer Smeral Made in Czechoslovakia Nominal forming force 1000 tons Stroke 220 mm Ram reset 10 mm Ram area 968�~750 mm Number of strokes 100/1 min Number of utilizable strokes 35/1min Distance between posts 1040 mm Height above floor 4600�~4840 mm Bed size 1000�~950 mm Ram size 1010�~850 mm Press height 4885 mm Electric motor output 55 kW Dimensions 2540�~2930 mm Press weight 48 tons

2500T Hot Forging Press -mechanical- Press Design drive systemeccentric / crank Press forces total force (nominal) 2500to Press Table table surface (left-right) 1400mm table surface (front-back) 1200mm Slide table surface (left-right) 1120mm table surface (front-back) 1070mm stroke 350mm stroke rate (max.) 60/min slide (mechan. Press) slide adjustment 10mm Tool Assembly Dimensions shut height (stroke down, adjustment up), BDC 900mm passline opening (free passage in side columns) 720mm free passage between side columns (height) 890mm Electrical specifications mains voltage 380V mains frequency 50Hz Dimensions / weights total height 8250mm height above floor level 6400mm total weight approx. 198000kg

Manufactured by TMP Voronezh(Russia) Year of manufacture 1978 Capacity, ton 1600 Number of strokes per minute 85 Table dimensions, mm 940 x 1200 Ram dimensions, mm 860 x 910 Size of windows in columns, mm 660 x 600 Ram stroke, mm 300 Max. distance between table and ram, mm 660 Table-to-ram adjustment, mm 10 Upper ejector: - stroke, mm 50 - force, ton 6,3 Lower ejector: - stroke, mm 50 - force, ton 10 Main motor power, kW 96,1 Voltage, V 380 Machine dimensions, mm 4850 x 3515 x 5570 Press weight, kg 119660

Maximum force ton-force 1600 tons Slider stroke length 300 mm Slider strokes per minute 75 Maximum distance between table and slider (in lower position of slider) 660 mm Size of adjustment of distance between a table and slider 10 mm Length of a rod 920 mm Bed overall dimensions 940�~1200 mm Slider overall dimensions 860�~910 mm The size of lateral windows Height 560 mm Width 600 mm Main motor 110 kW Press overall dimensions Length 5060 mm Width 3940 mm Height above floor level 5125 mm Press weight 120 tons

There are 5 presses available. Great conditions. Established in 1990. Only 7 years of operation. Capacity: 1000 tons Stroke: 400 mm Closing Height: 1060 mm Plunger adjustment: 320 mm Table size: 3150 x 1800 mm Plunger size: 3066 x 1700 mm Number of strokes per minute: 20 Maximum. permissible mass of a stamp on a container: 13000 kg Column clearance size: 1500 x 1900 mm Plate thickness: 250mm Piston travel to the extreme position at which it unfolds its rated load capacity: 12 mm Air bag capacity: 200 tons Air bag travel: 200 mm Top knockout power: 50 tons Main engine power: 132 kW Press dimensions: 5150 x 4700 x 7830 mm Press weight: 200 tons

Force 1600 tons Stroke 300 mm Adjustment 10 mm Number of strokes per minute 75 Shut height 660 mm Table dimensions 940�~1200 mm Slide dimensions 860�~910 mm Main motor 110 kW Press overall dimensions -Length 5060 mm -Width 3940 mm -Height above floor level 5125 mm Total weight 120 tons

Capacity 2500Tons Stroke 350mm SPM 60 Min.dist.bed & slide 890mm Adjustment 10mm Slide Dimensions left-to-right 1070mm Front-to-back 1120mm Bed Size 1200(LR) x 1400(FB)mm Slide knockout 6.3 Tons Slide Knockout stroke 50mm

Origin: U.S.A. Stroke: 8 Inch Bed: 24 Inch X 17 Inch Capacity: 100 Tons 60SPM