Search Machinery

Transfer Presses


1 ~ 21 of 21 POST


[Model] CT2-16

[Year] 1983

S:150 35-80spm DH:400 Adj:40 SL:1500*450 B:1640*450 Pin hole VS DC

SELLER : Megatech Co.Ltd



[Model] FT-C2-30


Stroke : 105 mm spm : 40 - 100 NO. of stages : 11 stages shut height : 250 mm tool holder adjustment : 30mm max. Clamping dia : 80 mm Distance between stage : 100 mm Clamp stroke : 50 mm Pass line : 120mm from upper bolster


[Model] FT-S2-30

[Year] 1971

S:105 40~90spm DH:250 Adj:30


[Model] FT-S2-30

[Year] 1970

S:105 40~100spm DH:250 Adj:30


[Model] FT2-25


Capacity: 250 tons Each stage capacity: 50 tons Number of stages: 13 Distance between stages: 250 mm Stroke length: 250 mm Blanking slide stroke: 60 mm Max. drawing depth: 85 mm Max. blank diameter: 200 mm Adjustment tool holder: 50 mm Number of strokes per minute: 20-40 Die height (stroke down adjustment up between carrier plate and tool holder): 650 mm Thickness of carrier plate: 230 mm Carrier plate hole: 200 mm Main electric motor: 55 kW Feed stroke length: 250 mm Lower die height: 400 mm Clamp stroke length: 120 mm Inside width of feed bars: 300 mm Stroke length (die cushion): 85 mm


[Model] FT2-30

[Year] 1988

Capacity : 30ton Stroke : 105mm spm : 40-80 No. of stages : 13 stages Shut height : 330 mm Distance between stage : 100mm Passline : 120mm from upper bolster


[Model] FT2-40


Capacity: 400 tons Capacity at above dead center 13 mm: 400 tons Capacity between columns: 400 tons Max. permissible pressure of each stage: 150 tons Max. capacity of blanking stage: 100 tons Stroke per minute: 8-12 Stroke length: 800 mm Die height (adjustment up stroke down): 1400 mm Blanking stroke: 120 mm Die height of blanking stage: 580 mm Adjustable length of blanking stage: 20 mm Adjustable length of tool holder: 80 mm Dimension of tool holder: 690x1150 mm Pitch of each stage: 700 mm Height of lower die from bolster to feed bar bottom surface: 800 mm Thickness of bolster plate: 250 mm Dimension of bolster plate: 4200x1400 mm Max. drawing depth: 280 mm


[Model] SCP-100

[Year] 2003

1. Press (Blanking + Cupping Press) No. of stations : 1 Rated capacity : 250kN Ram Stroke : 210mm Shut Height : 785mm 20-60spm 2. Press ( Drawing Press) No. of stations : 8 Rated capacity : 500kN Ram Stroke : 250mm 400mm 500mm​(Three strokes are available) Shut Height : 910mm 20-60spm

[MFR] Asahi-Seiki

[Model] ATP-30

[Year] 1992

30TON Stroke : 65mm Shut height : 280mm 50-200 spm

[MFR] Asahi-Seiki

[Model] MTP5-51

[Year] 1978

Stroke : 127mm Shut Height : 457.2mm 25-100spm Stations : 14 Pitch : 88.9mm

[MFR] Asahi-Seiki

[Model] STP-45

[Year] 1996

Stroke : 65 mm Shut height : 350 mm spm : 40 -150

[MFR] Asahi-Seiki

[Model] TP-65D

[Year] 2001

Stroke : 203.2mm Shut height : 518mm 25-100 spm 14 stage Pitch : 88.9mm


[Model] MTE 400

[Year] 1983

Capacity: 400 TON Stroke: 500mm S.P.M: 10-20 Die height: 800mm Slide Adjustment: 100mm Slide Area: 3500 x 1100mm Bolster Area: 3500 x 1100mm Sudden stop time: 250ms Main motor: 90kW




[Model] LEM-4305B

[Year] 1993

Bolster:1150*535mm 100-300spm Stroke:70 D.H:380mm


[Model] LEM-9706


S:60 80-250spm DH:350


[Model] KEZ663-26/9

[Year] 1990




[Model] HU 2-315

[Year] 1987

Press Design drive syste: ecc. crank frame design: H-frame monoblock direction: left to right Press forces total force: 315to Press Table table surface (l-r) 2500mm table surface (f-b) 1250mm thickness plate: 140mm height (above floor): 950mm Slide table surface (l-r): 2500mm table surface (f-b): 1250mm stroke: 200mm stroke rate (max.): 50/min slide adjustment: 100mm stroke adjustment: no stroke rate (min.): 10/min stroke rate (max.): 50/min Tool Assembly Dimensions shut height: 550mm Decoiler design: single reel max. weight of coil: 5to max. diameter of coil: 1500mm expansion range from: 470mm expansion range up to: 620mm Leveller Unit sheet width (max): 750mm sheet width (min): 100mm sheet thickness (max): 3mm sheet thickness (min): 0.5mm no of leveller rolls: 8 no of in-/outfeed rolls: 2 feed velocity (min): 2m/min feed velocity (max): 20m/min Strip-Feeder feeder type: roll feeder sheet width (max): 36225mm sheet thickness (max): 3mm feeding step (max): 999.9mm Transfer System distance between tools stroke X max. 630mm distance between tools stroke X min. 150mm stroke Y fix 100mm stroke Z fix 100mm distance press table - transfer rail min. 280mm Attachments (presses) + decoiler + leveller unit + strip feeder + feeder typeroll feeder + openings in uprights + quick die change system Coil Cradle SCHLEICHER HE 200-900 SPZ Strip Levelling Machine SCHLEICHER RMS 8-53/160-800 Roll Feeder SCHLEICHER WV-P 160/800 3-Axis Transfer System WEINGARTEN MGH 63.10.03


[Model] OTP-100


S:260 10-48spm DH:450 B:1800*510*120 #93100020


[Model] OTP-45-13

[Year] 1983

Stroke : 105 mm spm : 60-120 No. of stages : 13 Shut height : 250 mm Tool holder adjustment : 30mm Bolster : 1400 x 380 mm Max. clamp Dia. : 100mm Distance between Stage : 100mm Pass Line : 120 mm from upper bolster


[Model] MSD2-630-4

[Year] 2012

SERVOPRESS with 3-axis servo-transfer Tool weight, total max. 17000 kg Tool weight, upper part max. 8000 kg Coil reel SCHULER AC-UHL-220-1300 Leveller SCHULER AC-SH-9-70/160-1300 Serve-feed SCHULER AC-M-EHP-1300 POWERFEED 3D Servo-Transfer SCHULER AT2-M-800-500-200 Press Design drive systemservomechanic frame designH-frame, tie rod openings in uprightsyes number of suspensions2 number of slide actions1 feedstock transport directionleft to right Press forces total force (nominal)630to nominal work capacity125kNm Press Table table surface (left-right)4000mm table surface (front-back)1800mm Slide slide force630to table surface (left-right)4000mm table surface (front-back)1700mm stroke400mm stroke rate (max.)60/min slide (mechan. Press) slide adjustment300mm stroke min.80mm stroke max.400mm stroke rate (min.)3/min stroke rate (max.)60/min Tool Assembly Dimensions shut height (stroke down, adjustment up), BDC1000mm distance between columns (H-frame)4170mm passline opening (free passage in side columns)1800mm free passage between side columns (height)1600mm Overall Specifications (coil lines) sheet width max1300mm max. weight of coil14.5to feed velocity max.40m/min feedstock transport directionleft to right Coil Chair stroke630mm Decoiler designsingle reel sheet width max1300mm sheet width (min)80mm max. diameter of coil1800mm mandrel expansion range from470mm mandrel expansion range up to530mm movement2700mm Leveller Unit sheet thickness max5mm material cross section max. (450 N/mm2)2150mm² number of leveller rolls9 diameter of leveller rolls70mm distance between leveller rolls76mm number of infeed-/outfeed rolls2 diameter of feed rolls160mm loop controlsyes Strip-Feeder feeder typeroll feeder sheet width max1300mm feeding step max.600mm speed (max)2m/min band support rollsyes Transfer System distance between tools, stroke X max.800mm distance between tools, stroke X min.0mm stroke Y max.500mm stroke Y min.0mm stroke Z max.200mm stroke Z min.0mm Inner width clamping rails closed min.400mm Inner width clamping rails open max.1400mm distance press table - transfer rail min.560mm Electrical specifications mains power supply350kVA mains voltage400V mains frequency50Hz Dimensions / weights total weight approx.148000kg Attachments (presses) autom. tool clamping deviceyes decoileryes leveller unityes strip feederyes feeder typeroll feeder gripper transfer systemyes noise protection cabinyes vibration damping elements4 European CE standardsyes


[Model] MP-60H

[Year] 1988

S:140mm 40-150spm DH:310mm Adj:50mm SL:740*250mm Bo:1060*475mm Transfer Unit 70mm pitch x 10stages 2-D mechanical Transfer Unit included

{{ }} {{ contactModal.companyname }} {{ contactModal.title }} {{ contactModal.stockCode }} {{ contactModal.telephone }} {{ contactModal.inCharge }}
prev Next