- HOME
- Select Machine Name
- Tool Holding
Search Machinery
Tool Holding
1 ～ 50 of 56 POST
MST
-
【MST】 BT30-SLRA6-75-M22 【NIKKEN BT30-FMC22-40 BT30-FMA25.4-45 BT30-C20-75…2本 BT30-C25-75
HAAS
HAAS SL20 SL30 1.5 in. CNC Lathe Boring Bar Holder ID HL TURNING Up for sale is a Haas 1.50" I.D. Boring Bar holder that is in excellent condition. It is 3-1/4"L x 4"W x 2-1/8"H with a 3/8" lip in the front of it. This holder will work on many different types of Lathes but will work with a SL-20 or an SL-30.
HAAS
Haas SL40 1.25 in. Face Turn Tool Holder CNC Lathe OD ID TURNING Up for sale is a Haas 1.25" O.D. Face Turn Tool Holder that is in excellent conditiont and it came from a SL40. It comes with the brass coolant nozzles and tool retention block and bolts installed and ready bolt on your tool and run. It is 4-7/8"L x 5-1/4"W x 2-1/2"H with a 3/8" lip in the front.
HAAS
HAAS SL30 Turret Tool Holder CNC Lathe Curvic Coupling Up for sale is a "Like New" HAAS Turret Platen with the Curvic Coupling that is in excellent condition. It was from a 2009 HAAS SL-30. It was only removed due to electrical failure in the control. The part number stamped on the platen is: 21-0399; HAAS part number is: 93-1168. It is a 12 tool station platen. This unit from HAAS sells for $3,264.00 This will fit 1999 to present SL Series Lathes with the this type turret.This is a great deal to replace your worn out platen and coupling. The dimensions are; 16" in diameter and 4" wide. Actual weight is 127 lbs.
MAZAK
Mazak Axial Live Tool Holder Quick Turn 10 CNC Lathe VDI QT10 This Mazak Live/Rotary Tool Holder came from a Quick Turn 10N-ATC M/C CNC Lathe that is in excellent condition. It is a VDI-40 type tool with a collet chuck/nut and collet. It is a Axial Type and has a 1.57" O.D. Holding Post (40mm). The distance from the center of the Tool Post to the Locating/Lock Pin is 1.25". This holder also accepts coolant flow.
MAZAK
Mazak Quick Turn 10N ATC CNC VDI Boring Bar Lathe Tool Holder ID Turn Up for sale is a Mazak Static 40 VDI Boring Bar Holder that came from a Quick Turn 10N-ATC M/C CNC Turning Center that is in excellent condition. It is a VDI type tool with the centering pin hole. It has a 1.5" I.D. for a Drill/Boring Tool and a 1.57" O.D. Holding Post (40mm). It has a 0.69" I.D. hole in the center of the Holding Post. The distance from the center of the Holding Post to the cemter of the Locating/Lock Pin is 1.25".
MAZAK
Mazak Quick Turn 10N CNC VDI Lathe Tool Holder ID OD n Turning Center Up for sale is a Mazak Static 40 ID/OD VDI turning tool holder that is in excellent condition. It came from a Quick Turn 10N-ATC M/C CNC Turning Center. It has a 1-1/2" square tool bar holding capacity and has the number 31113 stamped on it. It is a VDI type tool with the centering pin hole in it. It has a 0.690" ID hole in the center of the tool post shaft. The distance from the center of the Holding Post (shaft) to the center of the Locating/Lock Pin is 1.25".
【NIKKEN】ZKN12/ZKN12-10/ZK16-6/ZKN24 【SHOWA】M8/M9/TCC29 M14/TCC20 M3×3/TCC20 M4×2/TCC20 M8/TCC20 M12/unknown 【KATO TAPPER】TC1022 【BIG】TCE12-M5/TCE12-M8/unknown
-
6…3 pieces 8…1 piece 10…2 pieces 12…2 pieces 16…4 pieces 20…5 pieces 25…4 pieces 32…4 pieces TOTAL 25 pieces
NIKKEN, BIG
-
【NIKKEN】 ・KM20-4 / ・K20-5 ・KM20-7 / ・KM20-9 ・KM32-20 / ・KM32-25 ・3 / ・5 / ・6…2 ・8…4 / ・10…2 ・12…4 / ・16…5 ・19…1 / ・20…2 ・25…2 ・不明…3 【BIG】 ・20-6 / ・20-8 ・20-10 / ・20-12 ・32-16
-
Tooling & Collet set
【Tooling】 (BIG) J45-6 (2) F45-4 (1) 145-GMC42 (1) (KATO TAPPER) 1 【Collet】 (BIG) C42-6/C42-8/C42-10/C42-12/C42-16/C42-20/C42-25/C42-32/9/10 total 10 (Nikken) KM42-32
