Search Machinery

CNC Lathe

SEARCH FILTER

1 ~ 50 of 168 POST

[MFR] ACRA

[Model] FEL-1640

[Year] 2015

Fanuc OI Mate TD Control

SELLER : Amiron Machines

ID:#1284

[MFR] AMADA WASINO

[Model] G07-F

[Year] 2008

JPY 1,550,000

Fanuc-21iTB Max swing:φ285 S:480*285 without chuck with cylinder (KITAGAWA AY2225R)

[MFR] BARON-MAX

[Model] KL2680

[Year] 2007

3 Bar 16" Chuck Tailstock Swing over bed 670mm Swing over cross slide 400mm Distance between centers 2100mm Chuck 16�h Spindle Speed 1200 rpm Thru hole 3 ?�h

[MFR] BINNS & BERRY

[Model] 1000x10000 with C axis

[Year] 1991

Turning diameter 1000 mm Turning length 10000 mm Control FAGOR 8025/30 Swing over support 1000 mm Bed width 750 (3 sheets) mm Spindle bore 140 mm Machine weight about 26 t Spindle motor 37.5 kW Spindle speeds from 1.5 to 1200 (3 steps) 1 / min

[MFR] BLUE LINE

[Model] BL-530TRII-850-52

[Year] 2002

Fanuc-20iT φ510*850 10"chuck 42 - 1500rpm

[MFR] BOEHRINGER

[Model] V800 15II

[Year] 2012

Heavy Duty From Aerospace Landing Gear Company Retrofitted in 2011/12 by Uptime Electronics with: Fanuc Oi-TD Control Swing Over Bed: 52" Distance Between Centers: 120" Spindle Bore: 8" Swing Over Cross Slide: 38" Swing Over Carriage: 44" Maximum Turning Capacity Full Length: 38" Automatic Turret Tool Positions: 8 Equipped With: 31" 4-Jaw Chuck Manual Chuck Steady Rest Boring Bar Holder Chip Conveyor Coolant System Special Features: New Chuck Guard Enclosure

[MFR] BSA TOOLS

[Model] Foremost 530

[Year] 2000

Control: Anilam 4200 T Centre Height 280 mm Length 1500 mm

SELLER : GUPTA IMPEX

ID:#1854

[MFR] CHUBU KOKI

[Model] FNS150×375 

[Year] 1996

Controller:MELDAS L3 Swing over bed:1,500 mm Swing over carriage:1,060 mm Distance between centers:3,750 mm Max. turning diameter:1,300 mm Max. turning length:3,600 mm Spindle bore:φ84 mm Spindle speed:3.5~350 rpm Travel X:780 Z:3,600 mm Tail stock diameter:140 mm Travel of tail stock:300 mm Required floor space:2,700×6,700 mm  Machine height:2,300 mm Machine weight:14,800 kg 4 squares turret:Auto indexing 4 jaw index chuck φ1,200 Steady rest φ100~φ500(Roller jaw) 1 set

ID:#10759

[MFR] CINCINNATI

[Model] 250MT

[Year] 1995

2.5" Bar 10" Chuck 4,000 RPM Bar Capacity 2.5" Chuck Size 10" Max. Cutting Diameter 10.39" Max. Machining Length 19.74" Max. Swing 23.5" Spindle Nose A2-6 Spindle Bore 3.15" Spindle Speed 4,000 RPM Spindle Motor 30 HP Rapid Traverse 787 / 944 IPM Tailstock Body Movement 23.5" Tailstock Quill Diameter 3.15" Tailstock Center MT #4 Turret Positions 10 X-Axis Travel 7.09" Z-Axis Travel 20.87" Machine Dimensions 104" x 68" x 69" Machine Weight 10,600 lbs.

[MFR] DAEWOO

[Model] PUMA 240 MB

[Year] 2004

MANUFACTURE DATE (INSTALLED NEW) 12/2004 (2005) MAXIMUM SWING OVER BED 21.7" SWING OVER SADDLE 15.4" MAXIMUM TURNING DIAMETER 11.8" MAXIMUM TURNING LENGTH 20.2" DISTANCE BETWEEN CENTERS 29.5" (w/CHUCK) X AXIS TRAVEL 8.1" Z AXIS TRAVEL 22.8" C AXIS SPINDLE INDEXING 0.001 DEG. SPINDLE BORE 3.1" MAXIMUM BAR CAPACITY 2.51" SPINDLE MOTOR 25 HP SPINDLE NOSE A2-6 SPINDLE SPEEDS 45 - 4,500 RPM RAPID TRAVERSE RATE Z AXIS / X AXIS 1200 IPM / 945 IPM LIVE TOOL SPEED / MOTOR 5000 RPM / 7.4 HP TURRET CAPACITY 12 STATION TURRET TAILSTOCK QUILL TAPER / DIA. MT #4 / 3" DIMENSIONS APPROX. 118"L x 69"W x 72"H WEIGHT APPROX. 10,000 LBS

[MFR] DAEWOO

[Model] Puma 240B

[Year] 2006

Bar Capacity 2.6" Fanuc 21i-TB CC Bar Feed Tool Preset

[MFR] DAEWOO

[Model] PUMA 250M

[Year] 1998

Fanuc-18T Max Swing over bed 22.44" Swing over saddle 14.57" Max turning Dia.15.75" Distance between centers 32.8" Max turning length 25.59" X axis travel 11.1" Z axis travel 26.77" Rapid traverse rate X axis 800ipm Rapid traverse rate Z axis 945ipm Spindle nose A2-8 Spindle bore Dia.3.54" Max bar capacity 3.03" Spindle speeds 35-3500rpm Spindle motor 30Hp Live tool motor 3/5Hp Live tool spindle speed 40-4000rpm Turret tool capacity 12st

[MFR] DAINICHI

[Model] B-90

[Year] 1991

Fanuc-15T medium type S915×880×650 3-jaw Hydraulic chuck:φ600(24") Hole through spindle dia:105 Spindle taper hole:120 AC37/30kw Power capacity:88KVA

[MFR] DAINICHI

[Model] BX105-150

[Year] 1998

【❖Take a look at our video!❖】 F18T 18"Hydraulic chuck Hole through:φ320 Bed Swing:φ1050 cross slide swing 900 Work length:1500 Tail cup XZ:510×1500 2~500min-1 V12

[MFR] DAINICHI

[Model] DL53*100

[Year] 1996

F-20T φ530*1000 Carriage pitchφ300  JN10T Scroll 16-1600rpm 7.5Kw

[MFR] DAINICHI

[Model] DL530x100

[Year] 2000

Fanuc-20T 10"chuck Swing over bed:530mm Swing over Carriage:300mm 1700rpm

[MFR] DAINICHI

[Model] F300MC/1250

[Year] 2000

Fanuc18i-T 12"chuck Swing on the carriage 500 Maximum processing diameter×length 430×1250 center 1270 V12 MT No.4

[MFR] DAINICHI

[Model] M112×500

[Year] 1991

Swing over bed:1,120 mm Swing over carriage:700 mm Distance between centers:5,000mm Bed width × height:1,010 x 595 mm Spindle nose type:JIS A2-15 Spindle bore dia.:φ104 mm Center size:1/10 meter taper No.80 75 degrees Spindle speed:1 ~ 500 rpm Both center support weight:10,000kg Chuck cantilever support weight:2,500kg Stroke X:750 Z:5,000mm Max. travel of tail stock spindle : 300mm Required floor space:2,728 x 9,065 mm   Height:2,545 mm Machine weight:18,000 kg 4-position turret φ1,000 4-jaw independent chuck Fixed stay φ50~φ350:1set、φ300~φ600:1set Chip conveyor included Threading cycle retract Automatic interactive programming

ID:#10936

[MFR] DAINICHI

[Model] M132R-1100

[Year] 1993

Fanuc-15TF Swing Over Bed:1320mm Z:11200mm X:450mm Y:±40mm 1~500rpm C:0.001degree Yaxis V8 spindle bore:dia104mm Chuck:1000mm 4jaws

[MFR] DMG MORI

[Model] CL2000B

[Year] 2017

M65V Max Turning dia440 Kitagawa BB-208 chuck Tail Stock 10Turret Tool Pre setter

[MFR] DMG MORI SEIKI

[Model] CTX-310

[Year] 2007

F 32i 8"chuck 6000min-1 Interaxis distance 600 S(XZ):202×450 12-station turret Tail stock 400V 50Hz with M

[MFR] DMG MORI SEIKI

[Model] NLX2500/700

[Year] 2016

LIQUIDATION---ALL ITEMS MUST GO please see the attached PDF for machines list ERGOline(Mitsubishi) 10"chuck Yaxis Chip conveyor Tail stock

[MFR] DORRIES

[Model] VCE 180

[Year] 1986

Technical details : Max. turning dia.:2200mm Max. turning height:1800mm Ram travel:1500mm Main drive:75kw Live spindle:15kw Spindle rotations:45- 1350 1/min Max. workpiece weight:12,000 kg

[MFR] EGURO

[Model] NUCJET-203

[Year] 1995

Precise compact size CNC Lathe Fanuc 18-T 8-station turret

[MFR] FUJI

[Model] SN

[Year] 1985

Fanuc-3T

[MFR] GEMINIS

[Model] GHT5 G2 1000 x 8000

[Year] 2006

Technical details Broach: 37 Kw EP: 8000 Weight approx.: 14000 kg Spindle diameter: 82 mm Maximum ? bench machining = 1000 mm Maximum ? cross slide machining = 680 mm Maximum distance between centers = 8000 mm Maximum weight between centers = 4800 kg Chip conveyor Jump Tower 4 tools 4-jaw chuck ? 900 mm 2 glasses fixed ? 420 mm 9 tool holder

SELLER : Staklija UAB

ID:#1841

[MFR] GILDEMEISTER

[Model] CTX 410

[Year] 2006

driven tools C axis tailstock Year of production: 2006 Turning diameter over bed: 505 mm Max. turning diameter: 320 mm Max. turning length: 600 mm Spindle bore: 65 mm Revolver head: 12 pcs (all driven) Control: CNC Heidenhain

SELLER : P.W.INTER-PLAST

ID:#1772

[MFR] GILDEMEISTER

[Model] CTX-510

[Year]

Standard Chuck Size 10" Max. Swing 26.8" Max. Turning Length 41" Max. Turning Diameter 18" Bar Capacity 3" Spindle Horsepower 42 kW Main Spindle Speeds 600 - 3500 RPM Turret Positions 12 X-Axis Travel 11.8" Z-Axis Travel 41.33" Live Tool Motor 5 HP Live Tool Speed 4,500 RPM Rotary Tools 12

[MFR] GILDEMEISTER

[Model] NEF320K

[Year]

[MFR] HAAS

[Model] SL-20T

[Year] 0

Control Haas Hours 3836 Spindle Hours Motion Hours 3399 X-Axis Travel 8.45" Z-Axis Travel 20.00" Max. Machining Diameter 10" Max. Machining Length 20.00" Max. Swing over Bed 9.5" Swing Over Apron 20.00" Chuck Size 8.3" Max. Bar Capacity 2.0" Spindle Bore 3.0" Spindle Speed 4,000 rpm Main Motor 20 hp X,Z- Axis Rapid Traverse 710 ipm Turret Tool Capacity 10 station Index Time 1 sec Tailstock Travel 20.00" Tailstock Taper MT4 Tailstock Thrust 300-1500 lbs Machine Dimension LxDxH Approx 124"x74"x70" Machine Weight Approx. 9,000 lbs

[MFR] HAAS

[Model] SL30T

[Year] 1999

10" chuck programmable tailstock

[MFR] HAAS

[Model] ST 30

[Year] 2014

Lathe CNC HAAS ST 30, driven tools, tailstock, bar feeder Year of production: 2014 Max turning diameter: 533 mm Max turning length: 660 mm Spindle bore: 76 mm Tool magazine: 12 pcs (all driven) Tailstock Bar feeder Servo Bar 300 Control: CNC Haas

SELLER : P.W.INTER-PLAST

ID:#8506

[MFR] HAAS

[Model] TL-3

[Year]

Chuck Size 12" Max. Swing 20" Swing over Cross Slide 13" Center Distance 60" Spinsle Bore 3.5" Spindle Motor 18 HP Spindle Speeds 1,800 RPM Spindle Nose A2-6 Approximate Weight 6,500 LBS Equipped With: Haas CNC 12" 3 Jaw Chuck Manual Steady Rest Manual Tailstock Rigid Tap Coolant Pump Kit

[MFR] HARDINGE

[Model] COBRA 42

[Year] 1997

SWING OVER BED............ 21" MAX TURNING DIA........... 8.25" SPINDLE NOSE.............. A2-5 TRAVELS: X......................... 7.75" Z......................... 14" RAPID TRAVERS RATE: X......................... 400 IPM Z......................... 630 IPM SPINDLE SPEEDS............ 50-5000 RPM SPINDLE MOTOR............. 7.5 HP AC DIMENSIONS (APPROX)....... 90" X 72" X 72 WEIGHT (APPROX)........... 6500 LBS. EQUIPPED WITH: FANUC 21 T CONTROL

[MFR] HARDINGE

[Model] CONQUEST 42

[Year] 1995

SWING OVER BED: --------------- 21" SPINDLE NOSE------------------- A2-5" MAX. TURNING DIA.: ------------ 8.25" TRAVELS: X AXIS: ----------------------- 7.75" Z AXIS: ----------------------- 14" RAPID TRAVERSE RATE: X AXIS: ----------------------- 400 IPM Z AXIS: ----------------------- 630 IPM SPINDLE NOSE: ----------------- A2-5 ROUND 16C COLLET THROUGH CAP: - 1.625" SPINDLE SPEEDS: ---------- 50 - 5,000 RPM SPINDLE MOTOR: ---------------- 10 HP AC TURRET TYPE: ------- 30mm VDI 12 STATION DIMENSIONS APPROX----------90" X 72" X 72"H WEIGHT APPROX------------------ 7500 LBS EQUIPPED WITH: FANUC 18T 32-BIT CNC CONTROL WITH 9" CRT RS-232C PORT INTERFACE FOR DNC OPERATION

[MFR] HARDINGE

[Model] CS-GT

[Year]

F-0T φ310 6000rpm X-300 Z-300 Air chuck

[MFR] HARRISON

[Model] ALPHA PLUS 550S

[Year] 2000

22" X 60" Harrison Lathe No. Alpha Plus 550S FANUC 21I-TB 3/32" 13.5 H.P.,00 Our stock number: 12829 Machine has less than 500 Hours of Turning Time Maximum Swing: .......... 22" Distance Between: Centers. 60" Spindle Speeds: ...... 18-1800 RPM Spindle Nose: ........ D1-11 Spindle Bore: ........ 4 3/32" Main Motor Horse Power 13.5 HP Control: Fanuc 21i-TB EQUIPPED WITH: 4 Jaw 16" Chuck Aloris Tool Post Full Manual or CNC Modes Programmed Sequential Operation Full Fanuc G-Code Programming Auto Cycle Operation Tool Room Development and One Off's to Medium Production Batch

[MFR] HASEGAWA

[Model] JW24

[Year] 2004

Fanuc-18iTB 2spindles w/Gantry loader

[MFR] HITACHI SEIKI

[Model] HT-25S

[Year]

SELLER : Vefa Makina

ID:#1677

[MFR] HITACHI SEIKI

[Model] TF20

[Year] 1998

Fanuc 21-T 10-station turret without chuck

[MFR] HYUNDAI

[Model] HiT-15S

[Year]

Chuck Size 8" Max. Swing 17.3" Max. Turning Dia. 10" Max. Turning Length 19" X-Axis Travel 7" Z-Axis Travel 20" Rapid Traverse ( X/Z ) 1181 IPM Max. Bar Capacity 2" Spinsle Bore 2.4" Spindle Speeds 4,500 RPM Spindle Nose A2-6 Spindle Motor 20 HP Turret Positions 12 Equipped With: Siemens Hitrol 840C CNC Control 3 Jaw Hydraulic Chuck Tool Eye

[MFR] HYUNDAI

[Model] HiT-8S

[Year]

Chuck Size 6" Max. Swing 11.8" Max. Turning Dia. 6.3" Max. Turning Length 11.2" X-Axis Travel 7.1" Z-Axis Travel 11.4" Rapid Traverse ( X/Z ) 1181 IPM Max. Bar Capacity 1.97" Spinsle Bore 2" Spindle Speeds 6000 RPM Spindle Nose A2-5 Turret Positions 8 Tailstock Quill Dia. 2.16" Tailstock Quill Stroke 3.74" Approximate Weight 573 LBS Equipped With: Siemens Sinumerik CNC Control Kitagowa B-206 Hydraulic Chuck Tool Eye

[MFR] HYUNDAI

[Model] SKT 2500

[Year]

Control unit: Fanuc 18i-TB 12" Chuck 10" Sub-spindle 5 axis Max swing: 780 mm Max turn: 500 mm Max turning lenght: 1100 mm Price: 73.000 euro Can be seen in the Kayseri freezone showroom Free loaded

SELLER : Vefa Makina

ID:#1678

[MFR] IKEGAI

[Model] AM20F

[Year] 2000

F-20T  φ480×1100  Crossφ250  Boreφ56 1600rpm  5.5Kw  10 inch scroll chuck

[MFR] IKEGAI

[Model] E-56

[Year] 1997

F-18iT φ1140*4000 Cross φ800 Bed width 1200 1-600rqm (Two-stage)  Dodecagonal drum type tool post Bite☐32  Bore : φ65 Tail stock : MT-6

[MFR] IKEGAI

[Model] TM25YS

[Year] 1999

Fanuc-16T Center750mm Work length:700mm Main Spindle:3jaws 10"chuck 3150rpm Max work dia350mm C-axis 0.001degree Sub Spindle:3jaws 8"chuck 4000rpm work dia250mm C-axis Upper turret:4800rpm BT40 1degree Lower Turret:V12

[MFR] INNSE

[Model] C / Y-axis 4 railway bed

[Year] 1987

Turning diameter 900 mm Turning length 9000 mm Control Fagor 8055 Spindle speed from 1.5 to 660 U / min Center height 550 mm Distance between centers 9000 mm Turning diameter over support 900 mm Spindle drive 62 kW Bed width 1050 mm

[MFR] KARATS

[Model] L-20N

[Year] 1991

Fanuc-15TA Swing over bed:2000 Swing over saddle:1600 Center:9000 Max processing weight:25t ATC-16

[MFR] KARATS

[Model] LR-15N

[Year] 2017

MACHINE SPECIFICATION (SWING OVER CARRIAGE): 1,600(mm) (CENTER DISTANCE): 8,000(mm) (WEIGHT OF WORKPIECE): 35,000(kg) (CENTER HEIGHT OVER BED): 1,100(mm) *MACHINE WORKED ONLY 6 MONTHES* CONTACT VIA PHONE: +82 10 8606 7124 VIA E-MAIL: limd1225@naver.com

SELLER : KMDR

ID:#11052

[MFR] KIA

[Model] 15LMS

[Year] 2005

SPINDLE/ NOSE A2-6 BAR CAPACITY 1.5" SPINDLE SPEED-MAIN MOTOR 6,000 RPM SPINDLE SPEED-SUB SPINDLE 5,000 RPM MAIN SPINDLE MOTOR HP 15/10 HP SUB-SPINDLE MOTOR HP 5/3 HP SWING OVER BED 21.6" SWING OVER CROSS SLIDE 13.8" MAXIMUM MACHINING DIAMETER 10" X-AXIS (CROSS) 8.7" Z-AXIS (LONGITUDINAL) 21.6" B- AXIS TRAVEL 29.5" CHUCK SIZE-MAIN SPINDLE 6" CHUCK SIZE-SUB SPINDLE 5" MAXIMUM TURNING LENGHT 20.8" TURRET NUMBER 12 TOOLS INDEXING TIME (1 STEP/FULL) 0.3 SECONDS / 0.6 SECONDS LIVE TOOLING ROTATING SPEED 4,000 RPM RAPID TRAVEL (X,Z AXIS) 1,417 IMP RAPID TRAVEL (B-AXIS) 1,181 IPM ELECTRIC POWER SUPPLY 30 KVA FLOOR SPACE (APPROX) 116" L x 65" W x 74" H ELECTRICS 220 V / 3 / 60

{{ contactModal.id }} {{ contactModal.companyname }} {{ contactModal.title }} {{ contactModal.stockCode }} {{ contactModal.telephone }} {{ contactModal.inCharge }}
prev Next