Search Machinery

Hydraulic Presses

SEARCH FILTER

1 ~ 50 of 59 POST

[MFR] AMINO

[Model] 10X6T

[Year]

SELLER : Wongtanawoot

ID:#773

[MFR] JAM

[Model] HYP-505S

[Year] 1999

ST:150mm BL:400x340mm

[MFR] LITOSTROJ

[Model] HVO-2-160

[Year]

Capacity of slider: 160-1600 kN Course of slider: 630 mm Capacity of pillow: 63-630 kN Course of pilow: 250 mm Opened height: 1000 mm Table size: 1000x1000 mm Pilow size: 800x800 mm Down speed of slider: 320 mm/s Slider speed: 50-3 mm/ Up speed of slider: 250 mm/s Speed of pillow: 40 mm/s Slide adjustment speed: 10-1 mm/s Refueling volume of working liquid: 1000 l Electricity: 3 x 380 V 50 Hz Main motor power: 36 kW Dimensions: 2400x1400x4500 mm Press weight: 16 tons

[MFR]

[Model] PHK3S

[Year]

Stroke: 200mm

[MFR] CHIBA

[Model] 50 TON

[Year]

SELLER : Wongtanawoot

ID:#774

[MFR] EXNER

[Model] EEX40SO

[Year] 1979

EUR 12900

Used EXNER EEX40SO Press with Siemens controls Machine was overhauled in 2007: Control system Siemens Simatic C7 Technical specifications Pressing force 400 kN Deep-drawing cushion 100 mm 160 kN Mounting height 750 mm Stroke 300 mm Total height of the machine approx. 3.100 mm Table top 1000x600 mm Plunger plate 400x300 mm Working speed up to 32% load mx 166 mm / sec Working speed up to 100% load mx 62 mm / sec Oil filling 1.200 liters Power consumption 26 kW Overhaul work from the end of 2006 to the beginning of 2007: Piston rod and stepped piston on dimensioned loops Through-ring for stepped piston including sealing kit renewed Hydraulic Double Pump Dismantled & Cleaned Axial piston pump renewed & adjusted Additional oil air cooler installed Switchbox with Sinematic C7 renewed UVV approved.

[MFR] FEINTOOL

[Model] GKP-F 25/40

[Year] 1969

Shearing force: 25 tons Total force: 40 tons Slide stroke: 36...90 or 45...110/min Feeding. Band thickness/width of band: 1-4mm/100mm Max. feeding length: 60 mm Max. distance of clamp feeding: 4 mm Max. clamping power: 1324 N Pump motor power: 0,75 kW Electricity: 380V / 50Hz Main motor: 3 kW Machine overall dimensions: -Length: 1260 mm -Width: 1260 mm -Height: 1300 mm Machine weight: 2500 kg

[MFR] JAM

[Model] HYP1000

[Year] 2008

B:440×430mm ST:200mm SN:80012

[MFR] JAM

[Model] HYP1000

[Year] 2008

B:440×430mm ST:200mm

[MFR] KONGO

[Model] 30-M-2015

[Year]

SELLER : Wongtanawoot

ID:#775

[MFR] OHTAKE

[Model] 5615

[Year]

JPY 10,000

Manual type hydraulic press

[MFR] WASINO

[Model] HBP-304

[Year] 1981

Pressure capacity 30T S100 DL520 Inertia drop value: 5.0mm Sudden stop time: 150ms 200/220V 3phase 50 / 60Hz Motor 2.5kw Tank capacity 40L

[MFR] YOSHITSUKA

[Model] PCMH-40SU

[Year] 2005

8 ̄32spm

[MFR] AIDA

[Model] PD-200

[Year] 1985

B:2000x1330mm ST:300mm 10~25spm DH:520mm

[MFR] AMINO

[Model] DR100AF

[Year] 1989

B:1800x1400mm ST1200mm Reversing 180degree work weight:3000kg

[MFR] AMINO

[Model] SDP-150

[Year]

# 0786 AMINO JAPAN 19180352 "MODEL: SDP-150 Cap: 150T, Stroke: 600mm, Bed Size: 1000 x 900mm, Ram Size: 1000 x 900mm, Day Light: 1100mm, Die Cushion Cap.: 20t SPM: Power Req. 20kva FB: 8'-0"" LR: 7'-9"" HT: 17'-8"" With Die Cushion"

[MFR] ASAI

[Model] HIS 300

[Year] 1994

--- per request

Max.pressing capacity 300T Daylight 1400mm Bolster dimensions 2000×1500mm Slide dimensions 2000mm×1500mm Stroke length 900mm Main Motor 55 kw Die cushion capacity 20-150T Die cushion stroke 350mm Die cushion pad dimensions 1550mm×1050mm

SELLER : W & N

ID:#11174

[MFR] FEINTOOL

[Model] GKP-F 125/200

[Year] 1974

Total force: 200 tons Shearing force: 125 tons Upper table force: 2-60 tons Lower table force: 2-60 tons Ejector force: 18 tons Drive motor power: 20 hp Pump motor power: 15 hp Number of slide strokes per minute: 15-60 Max. material thickness: 10 mm Frontal passage between columns: 560 mm Side passage between columns: 270 mm Tool height: 160-305 mm 175-320 mm Vertical travel of upper bolster plate: 145 mm Upper bolster plate dimensions: 540 x 540 mm Lower bolster plate dimensions: 540 x 540 mm Max. hydraulic stroke of ejector: 14 mm Max. strip thickness: 10 mm Max. strip width: 250 mm Max. moving-out length per every slide stroke: 250 mm Power supply connection: 360 V 50 Hz Electric control: 24 V 100 W Lighting: 220 V 24 W Drive motor: 360 V 50 Hz Pump motor: 360 V 50 Hz Machine dimensions: -Height: 3120 mm -Depth: 1900 mm Machine weight: 14,5 tons

[MFR] FEINTOOL

[Model] HFA250

[Year] 1985

Feintool AG Lyss Total Pressure 2500 kN

[MFR] INOUE YUATSU

[Model] AC-100

[Year] 1981

【❖Take a look at our video!❖】 Table length:1000×800 Inertia falling value:205 100T stroke:500 motor:3.7kw

[MFR] KANTO YUATSU

[Model] PH-150

[Year]

T:1500x2000mm ST:550mm 37kw

[MFR] KANTO YUATSU

[Model] VUL-150-50

[Year] 1982

ST:400-250㎜ DL:800㎜ BL:1000*800㎜

[MFR] KAWASAKI

[Model] FMP2-500

[Year] 1994

500ton electronic pressure & flow control Pressure adjust:42~210kgf/cm2 Bolster:2000×1500 Slide:2000×1500 Day light:1500mm Stroke:1200mm Press speed:8~0.5mm/s No load speed:300mm/s Elevation speed:160mm/s 55Kw/ 4P Slide fall prevention Photoelectric sensing safaty

[MFR] KAWASAKI

[Model] WFP2-440

[Year]

SELLER : Wongtanawoot

ID:#776

[MFR] LAPPLE

[Model] 750 T

[Year]

Laepple Hydraulic Press 750 T single action ? table 3000 x 1900mm

[MFR] LIEN CHEN

[Model] LDO-150-20-1200*1000 【NEW】

[Year]

[ECO Servo specification] ability 25-150t Ability to pull up 11t T:1200×1000 S:800 DL:1000 Die cushion:8-20t T(Fl~) 1100 200V tank 800L

[MFR] M.C.M

[Model]

[Year]

[MFR] MITSUBISHI

[Model] PE-150

[Year]

# 0846 MITSUBISHI JAPAN 18170453 "MODEL: PE-150 Cap: 150T, Stroke: 500mm, Bed Size: 1500 x 950mm, Ram Size: 1500 x 750mm, Day Light: 900mm, Power Req. kva FB: 6'-0"" LR: 9'-7"" HT: 15'-5"" With Die Cushion"

[MFR] MORI

[Model] MSF-100

[Year]

SELLER : Wongtanawoot

ID:#777

[MFR] NEAGARI

[Model]

[Year] 1995

B:1800x1150mm ST:600mm cusion tempture controller

[MFR] OGIHARA

[Model] CDS-1612-150TS/F180

[Year] 1996

150T DL:1500 T:1600*1200 180°Inverted type

[MFR] OGIHARA

[Model] CDS-3020-300TS

[Year] 1990

B:3000x2000mm Open height:2500mm Slide stroke:2500mm 180degrees forward reversing device

[MFR] OSAKA JACK

[Model] HPA-100

[Year]

SELLER : Wongtanawoot

ID:#778

[MFR] OSAKA JACK

[Model] HPC-H100

[Year] 1986

Pressure capacity: 100t Stroke length: 350mm Gap: 350mm Daylight: 600mm Electric motor: 5.5kw 2 units Pressurization speed: 10.3 / 8.5mm / sec Sudden stop time: 85msec

[MFR] OSAKA JACK

[Model] HPC-H150

[Year] 1982

S:350 DL:600 BL:1100*700

[MFR] OSAKA JACK

[Model] HPE

[Year] 1997

Capacity:200t S:500 DL:1000 T:2000*1100 SL:1900*900 DC:100t

[MFR] OSAKA JACK

[Model] HPE

[Year] 1997

Capacity:200t S:500 DL:1000 T:2000*1100 SL:1900*900 DC:100t

[MFR] SANKI SEIKO

[Model] SDP-1612-100T

[Year] 1982

Pressure capability 20~100t Raising ability 60t table 1600×1200 DL 1500 stroke 1000 table stroke 1300 Inversion angle 110° Ability to invert 3t Hydraulic tank capacity 400L main motor 15KW×6P 1170rpm

[MFR] SANKI SEIKO

[Model] SDP-1612-150/F180°

[Year] 1997

Pressure capacity:150t T:1600×1200 Daylight:1500 ST:1390 180°Reversing type

[MFR] SCHULER

[Model] HYDRAP 500

[Year] 2010

Condition: Very good dismantled Technical details: Capacity:500 T Bed size dimension: 1500 x1400mm Cutting shock damping: 5000kN Function spring tool: 200kN Quills bore in table: 49 pcs Distance quills bores in X and Y:x 150mm Y 150mm

[MFR] SCHULER

[Model] SCHULER HYDRAP 315

[Year] 2001

Model: HPDZb 3150-3000/1300 YOM: 2001 Condition: Very good Technical details: Capacity: 315 ton Bed size dimensions: 3000 x 1300 mm Min. die stamping dimensions: 2000 x 866 mm Stroke: 800 mm Machine weight: 85T

[MFR] SCHULER

[Model]

[Year] 2001

EUR 240000

New in: 2001 Condition: Very good 2 pieces Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm The price quoted for the 2 presses!!!

[MFR] SHINOHARA

[Model] ST2-250

[Year] 1983

Shinohara Machinery 250 ton press Manufacturer: Shinohara Machinery Model: ST2-250 Year of manufacture: 1983 Capacity: 250 tons Stroke: 200 mm Die height: 655 mm Slide adjustment: 15 mm SPM: 65 Bolster: 1150x1100 mm Slide: 900x1100 mm Bolster thickness: 180 mm Cushion: 15 tons x 100 mm Pad: 250x400

SELLER : W & N

ID:#10706

[MFR] SUZUKI

[Model] BDT-200M-2015

[Year] 1979

SUZUKI ( KONGO ) B:2000x1500mm

[MFR] TOKO

[Model] SFDC-100T

[Year] 1994

Table size: 1000 x 700mm Capacity: 100T Stoke: 20-110mm

[MFR] UMEBAYASHI

[Model] UME-150

[Year] 1985

Capacity:150t

[MFR] UMEBAYASHI

[Model] UME-150

[Year] 1985

Capacity:150t

[MFR] VORONEZH

[Model] K7538

[Year]

Nominal Force 630/400 ton Slider stroke ? Internal slider 1000 mm ? External slider 630 mm Number of strokes per minute ? Continuous 8-14 ? Single 6-10 Shut height 1700 mm Adjustment 400 mm Table size 3150�~2500 mm Slider sizes ? Internal 2650�~1900 mm ? External 3140�~2500 mm Dimensions (WxLxH) 5260x4830x12700 Weight 269 ton

[MFR]

[Model] P3239

[Year]

Force 800 ton Stroke 1200 mm Shut height 2200 mm Table size (width length) 2600 x 3600 mm Dimension (width length height) 6390 x 11015 x 6605 Weight 157 ton

{{ contactModal.id }} {{ contactModal.companyname }} {{ contactModal.title }} {{ contactModal.stockCode }} {{ contactModal.telephone }} {{ contactModal.inCharge }}
prev Next