Search Machinery

Rolling Mill Equipment

SEARCH FILTER

1 ~ 13 of 13 POST

[MFR]BLAW KNOX

[Model]

[Year]

Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages                            Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator

ID:#12275

[MFR]DAVY

[Model]

[Year]

Consists of: Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blow-Knox in 1923. • Main Motor : Synchronous type • Main Motor Power: 6000 HP • Motor Speed: 250 rpm • Maximum Rolling Force: 700 t • Maximum Edger Force: 100 t • Edger Motor Power: 300 HP (224 kW) • Transfer Bar Speed: 2,9 m/s Crop Shear • Drum Type Rotary Crop Shear • Manufacturer: United • Maximum Transfer Bar Section: 32 x 1575 mm at 940 °C, 0,4%C Carbon Steel • Maximum Transfer Bar Speed: 2.5 m/s Finishing Mill • Type: 4 Hi 6 Stands • Mechanical Manufacturer: United • Electrical Manufacturer: General Electric • Roll Barrel: 1.727 mm (68”) • Work Rolls Diameter: 699 mm (27,5”) • Back-Up Roll Diameter: 1.380 mm (54”) • Maximum Rolling Force Stands 1 to 4: 2.400 t • Maximum Rolling Force Stand 5: 2.000 t • Maximum Rolling Force Stand 6: 1.600 t • Electromechanical Screw down Stands 1 to 4 • Electromechanical Screw down & hydraulic capsules in Stands 5 & 6. • 40 t per chock work roll bending per stand. • Main Drives Stands 1 and 2: 6.000 HP (4.476 kW) • Main Drives Stands 3 to 5: 5.000 HP (3.730 kW) • Main Drive Stan 6: 4.000 HP (2.984 kW) • All main drives are DC with thyristor speed control. • Maximum Finishing Speed: 830 m/min • Two X-Ray Gages • Commissioned in 1970 (Stands 3 to 6) and revamped in 1995 (Adding Stands 1 & 2) Laminar Cooling • Seven Cooling Sections                     • Three Control Zones • Total Water Flow: 5.270 m³/h • Upper Face Cooling: 4.100 m³/h • Bottom Face Cooling: 1.170 m³/h • Water Pressure: 2,5 barg Single Downcoiler • Two Wrapper Rolls pneumatically activated. • Maximum Coil Width: 1.575 mm (62”) • Maximum Coil Weight: 20 t • Maximum Coil Diameter: 1.727 mm (68”) • Mandrel Diameter: 724 mm (28.5“) • Strip Thickness: 1,8 to 12,7 mm             

ID:#12274

[MFR]OKADA GIKEN

[Model]

[Year]

Thickness: 0.3~ 1.2 (2)mm, CR, Surface Treated Coil, Width: 100 ~ 750 mm, Coil Weight : 5,000kg(MAX, Product Length: 300 ~ 3,000mm, Line Speed: 80M/min, Line Directtion: 「Right」→「Left, Manufacturer(Machinery: Okada Giken 1991) (Electric manufacturer: Reliance 2011),

SELLER :KTK Co., Ltd

ID:#12212

[MFR]RIKOSHA

[Model]

[Year]

[MFR]SKET

[Model]UBR 25x3150-7/16

[Year]1980

Max width of sheet: 3200 mm Useful length of roll: 3400 mm Max thickness of metal sheet: 24-30 mm Max thickness of metal sheet by max length: 25 mm Min thickness of metal sheet by max length: 8 mm Max resistance by max size of metal sheet: 34 kP/mm2 Diameter of rolls: 270 mm Diameter of outgoing rolls: 320 mm 7 leveling rollers Leveling speed: 16 m/min 18 backup rolls Diameter of backup rolls: 268 mm Main drive: 85 kW Rotational speed: 990U/min Machine weight: 61250 kg

[MFR]SMS

[Model]

[Year]

Mfg. SMS Mannesmann Demag Sack Year of Mfg. 1978; continuously upgraded Min/Max plate width 1.500/3.800 mm Plate thickness range 4 to 150 mm Min/Max Plate length 6 to 42 Meter Max Rolling Force 78.500 kN Nominal Rolling Force 65.000 kN (24) Work Rolls Face length 3.900 mm Diameter 900-1.000 mm Weight each 30 Ton (6) Back-Up rolls Face length 3.600 mm Diameter 1.950-2.100 mm Weight each 136 ton Bearings Mesta Oilfilm Bearings Rolling level, above floor 750 mm Pass Line level 25-35 mm Max Rolling Speed 6 m/sec. Main Drive Motors (Twin Drive) 11.540kW each Features: Electromechanical Adjustment EGC (Electronic Gap Control) Distance between the screws 5100 mm speed 34 mm/sec. Stroke of the top roll 500 mm Hydraulic Adjustment HGC (Hydr. Gap Control) SMS-SERMUS AGC (Automatic Gauge Control + Roll Force Measuring) travel 3.0 – 15 mm; max travel speed 14 mm/sec. max stroke 20 mm Roll Bending max bending pressure 660 kN (top work-roll)/420 kN (bottom work-roll) Automation Siemens S-7 (2019-2020) Rolling Controls VAI-Vantage Level 2 VAI-Xpicit Automatic Inspection Additional Equipment Slab Descaler SGGT (2009) by Hi-Pressure Waterjets (top + bottom), Pressure 120 and 320 bar Side Edgers on entry conveyor 3-Track thickness and temperature measuring THERMO FISCHER SCIENTIFIC Gantry Crane LIESGANG, cap. 250 ton for lifting the Rolls with chocks. (6) Spare Bearings, some previously used

ID:#12360

[MFR]SMS

[Model]

[Year]

Cold Plate Leveling Machine SMS Mannesmann-Demag-Sack Mfg: “SMS” Mannesmann-Demag-Sack Year of Mfg. 1989; continuously upgraded Cassette Type Leveler With two cassettes (one located in bay 23) Min/Max plate width: 1500/3600 mm Min/Max plate thickness: 3/25 mm Main thickness range: 6 – 12 mm Max leveling Pressure: 24.000kN Min/Max plate length: 2 – 30 Meter Plate temperatures: 100º Celcius Roll diameter x length (for all rolls): 190 x 3.800 mm No. of leveling rolls: 13 (all powered) Division of all leveling rolls: 200 mm Support of the top rolls: 7 x 8 Support of the bottom rolls: 5 x 8 Support of the exit rolls: 2 x 3 Max opening between the leveling rolls: 230 mm Max. distance between the columns: 3.800 mm Leveling speed (approx.): 0 to 30/60 M/min. Adjustment speed of leveling rolls (approx.): 0 to 20 mm/sec. Adjustment speed of exit rolls: v to 1,0 mm/sec. 3 Main (DC) Motors, each 278 kW Equipped with: • Roll cambering (bending) of leveling rolls • Centering Device • Drives Siemens S7 • Exit Table with built-in weighing scale • Flatness Measuring Unit “NOKRA” Year of Mfg. 2004 Testing results among other DIN EN 10029 and ASTM A20M Linear testing method (10) sensors (laser and camera)

ID:#12362

[MFR]SMS

[Model]

[Year]1999

Hot Plate Leveler SMS Mannesmann Demag Sack Mfg. SMS Mannesmann Demag Sack Year of Mfg. 1990; Continuously upgraded Cassette type leveler Max Plate Width: 3.900 mm Max Leveling Pressure: 30.000kN Min Plate Thickness: 4 mm (pre-leveling range) 8 mm (hot leveling range) Max Plate Thickness: 100 mm (hot leveling), exception 200 mm Plate Length: 3 – 10 Meter Plate Temperatures: 250 – 1.000º Celcius C. (Stainless Steel): 1.50º C Stainless Steel Leveling range-diagram: see table 01.03 Max pressure depending on plate width: see table 01.04 – 01.05 Max travel of top adjustments: see table 01.06 – 01.09 Roll diameter x length (for all rolls) diameter: 285 mm x 4.100 mm No. of leveling rolls: 11 (all powered) Division of all leveling rolls: 300 mm Support of the top rolls: 5 x 6 Support of the bottom rolls: 4 x 6 Support of the exit rolls: 2 x 3 Max opening between the leveling rolls: 300 mm Max. distance between the columns: 4.100 mm Leveling speed: 0 to 46,5/93 M/min. (approx.) Adjustment speed of leveling rolls: 0 to 20 mm/sec. (approx.) Adjustment speed of exit rolls: v to 1,0 mm/sec. (4) Main drive motors: 278 kW, each Equipped with: (4) Hydraulic Cylinders for cambering (bending) of the rolls. Flatness and Temperature Measuring and Unit “NOKRA”, situated at the entry of the Leveler Lifting Beam for lifting Rolls Plate thickness ranges: 8-25/100/200 mm Max Leveling Speed: 1,5 M/sec. Max Leveling Force: 30.000 kN 11 Straightening Rolls: 5 top and 6 bottom Roll diameter length: 285 mm x 4.100 mm Main adjustment: 4 Hydraulic Cylinders. Special adjustment (hydraulic): Cambering of Straightening Rolls, Tipping, Weighing Two change cassettes (one located at bay 23) Controls: ABB (upgraded after 2010)

ID:#12363

[MFR]Sundwig

[Model]200/100.3800/13

[Year]2010

Roller Leveling Machine Sundwig Mfg: Sundwig Model 200/100.3800/13 Year of Mfg. 2010 Serial No. 76100380 Max. Pressure 7.000 Ton Plate thickness 4 – 60 mm Plate width 700 – 3800 mm Speed 0-40 M/min Max opening 150 mm Motorized Roll Support Adjustment; speed 71 mm/min Main Drive, 2 Motors 1000 kW each Entry Roller Conveyor with centering device (length 6000 mm, opening 700 - 4170 mm), Exit Roller Conveyor, Double Pinch Roll at entry side, exit roller table with laser flatness measuring, fully automatic cassette changing system (takes less than 15 Min.) complete automation with automatic setting. Equipped with Calibration blocks Electro-Mechanical Roll Adjustment Entry Conveyor with 2 powered rolls Exhaust Unit, Entry side Three Change Cassettes: Two cassettes with 13 Rolls (6 top rolls, 7 bottom rolls) Roll diameter 200 mm x 4932 mm length Thickness range 5 to 20 mm Max speed 40 M/min One cassette with 17 Rolls (8 top rolls, 9 bottom rolls) Roll Diameter 100 mm x 4837 mm length Thickness range 3 to 6 mm Max Speed 40 M/min. One Cassette Changing Car Total weight 1.060 Ton

ID:#12361

[MFR]VEB BLEMA GOTHA

[Model]UBR 9x2500/1-16

[Year]

Max. sheet width: 2500 mm Max. sheet thickness: 9 mm Min. sheet thickness: 6 mm Number of straightening rolls: 16 Straightening speed: 16 m/min Total power requirement: 30 kW

[MFR]WMW

[Model]UBR 10x2000/1-16

[Year]1991

Max sheet width: 2000 mm Sheet thickness: -Max: 10 mm -Min: 4 mm Straightening rolls: -Quantity: 13 units -Diameter: 140 mm Throughput speed: 16 m/min Center distance between rolls: 150 mm Main motor power: 30 kW Overall dimension: -Length: 5350 mm -Width: 2900 mm -Height: 2500 mm Total weight: 32 ton Machine wasn't used. Missed parts: main motor 2 top small motors control panel and electrical cabinet.

[MFR]

[Model]

[Year]

[MFR]TOKYO ADC

[Model]

[Year]2005

Stainless Foil, Aluminium Foil, Thckness: 0.03t ~ 0.5 t, Width: 350 mm (MAX), Coil Weight:1,500 kg (MAX), Line Speed : 100 m/min (MAX), Slitter Stand shaft: φ66.7 mm, Line Direction : Right to Left, <NO1 Recoiler (Rewinder)> ① Coil Inner Diameter: φ300 mm (巻取板), φ500 mm (巻取板) ② Coil Outer Diameter : φ1,000 mm (MAX) ③ Coil Weight : 1,500 kg (MAX) <NO2~NO6 Recoiler> ① Coil Inner Diameter: φ300mm ② Coil Outer Diameter: φ1,000 mm (MAX)  ③ Coil Weight : 150 kg (MAX) (300kg per 1 shaft)

SELLER :KTK Co., Ltd

ID:#12213

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}
prevNext