Search Machinery

CNC Internal Grinder

SEARCH FILTER

1 ~ 7 of 7 POST

[MFR] KOYO

[Model] VG-50

[Year] 2007

[MFR] OKAMOTO

[Model] IGM-15NCⅢ

[Year] 2014

Okamoto Precision (Fanuc-0iTD) 7"Scroll chuck (Kitagawa JN07) Internal Diameter to be Ground:6~150mm Swing over table:600mm Spindle Speed 20000rpm Single point dresser

[MFR] OKUMA

[Model] GI-20N

[Year] 1991

Swing over table:φ500 Max taper hole processing angle:20 Spindle edge diameter:φ100 Hole through diameter:φ70 100~750rpm

[MFR] OKUMA

[Model] GI-20N 2WS 

[Year] 2001

Control:OSP-U10G Year: 2001(overhauled by OKUMA in 2010) Grindable bore dia. area:φ5~300/(only φ300 grindstone with φ100 spec) Gridable outside dia. area:φ200/ grindstone withφ100 dia. Grindable work length:200mm Grindable chuck jaw dia:φ300mm + grindstone dia. Swing inside cover:φ400mm Work length:200mm Work weight×length:150 ~ 200kg-mm Spindle nose dia:φ100mm    Spindle bore:φ70mm Spindle speed:100~750rpm Number of spindle speed(C-axis):non-stage(available by NC program) Work headstock turning angle:10 deg. Infeeder device travel (XA-axis):50 backward, 150 forward Table travel(ZA-axis):500mm Grindstone turning angle:5 deg.  Grindstone right-and-left travel:350mm Grindstone modification device travel (outer dia.):rapid traversse 70(air drive) Machine height:2,000mm Required floor space::3,330 x 3,660 mm Machine weight:4,800kg High frequency drive grindstone axis:2 sets HQ307:15,000 ~ 30,000rpm HQ157:9,000 ~ 15,000rpm Grindstone modification device Paper filters and tank with magnet separator 9-inch 3-jaw scroll chuck Swing type automatic end grinding device

ID:#10762

[MFR] TOYO

[Model] T-10N78

[Year] 1996

2 rollers 1 shoe

[MFR] TOYO

[Model] T-11J

[Year] 2003

[MFR] TOYO

[Model] T-11KN

[Year] 2000

NC:TOYOMATIC swing over the table:510mm

{{ contactModal.id }} {{ contactModal.companyname }} {{ contactModal.title }} {{ contactModal.stockCode }} {{ contactModal.telephone }} {{ contactModal.inCharge }}
prev Next