No. 2,
3 in stock
4 1/4 DIA
UP TO 16DP
Max face width 7/16
-----------------------------
No. 102,
5 in stock
Max dia 117(spiral)
Max dia 95(Hypoid)
Max module1.6
Face width(maximum)11mm
Workhead angle -12°~90°
Number of teeth 5~200mm
Main motor 3/4HP×1800rpm(60cycle)
machine weight 1757KG
-----------------------------
No. 463,
MAX DIA (34")、861mm
2DP (MODULE 12)
Cone distance(maximum 30° Spiral angle and 12" diameter wheel 381 mm
depth of taper 6"
feed(sec/tooth) 1.9 to 11.8 seconds
feed motor 1500rpm
Max. cone distance (30 degree angle and 300 mm cutter): 228 m
Max. extreme ratio: 10 to 1
Max. gear pitch diameter (30 degree spiral angle):
-Ratio 10 to 1: 457 mm
-Ratio 2 to 1: 406 mm
-Ratio 1 to 1: 323 mm
Diametral pitch (coarsest): 12,7 mod.
Max. full depth: 25,4 mm
Max. face width: 69,9 mm
Number of teeth: 5 to 150
WORK SPINDLE
Diameter of taper hole at large end: 100 mm
Taper per foot: 39/1600 mm
Depth of taper: 150 mm
Diameter of spindle nose: 137,5 mm
Max. length of dividing cone: 107 mm
Min. length of dividing cone: 0 mm
Max. adjusting angle: 90 degrees
Min. adjusting angle: 8 degrees
Transmissive ratio: 6:1
Max. diametral pitch: 6,35
Diapason of division: 9-120
Width of tooth: 35 mm
MAIN SPINDLE
Diameter of cone opening on tip: 58,34 mm
Obliquity on 304,8 mm length: 12,7 mm
Obliquity: 15,87 mm
