HARDINGE Product List

SEARCH FILTER

1 ~ 7 of 7 POST

[MFR] HARDINGE

[Model] COBRA 42

[Year] 1997

SWING OVER BED............ 21" MAX TURNING DIA........... 8.25" SPINDLE NOSE.............. A2-5 TRAVELS: X......................... 7.75" Z......................... 14" RAPID TRAVERS RATE: X......................... 400 IPM Z......................... 630 IPM SPINDLE SPEEDS............ 50-5000 RPM SPINDLE MOTOR............. 7.5 HP AC DIMENSIONS (APPROX)....... 90" X 72" X 72 WEIGHT (APPROX)........... 6500 LBS. EQUIPPED WITH: FANUC 21 T CONTROL

[MFR] HARDINGE

[Model] CONQUEST 42

[Year] 1995

SWING OVER BED: --------------- 21" SPINDLE NOSE------------------- A2-5" MAX. TURNING DIA.: ------------ 8.25" TRAVELS: X AXIS: ----------------------- 7.75" Z AXIS: ----------------------- 14" RAPID TRAVERSE RATE: X AXIS: ----------------------- 400 IPM Z AXIS: ----------------------- 630 IPM SPINDLE NOSE: ----------------- A2-5 ROUND 16C COLLET THROUGH CAP: - 1.625" SPINDLE SPEEDS: ---------- 50 - 5,000 RPM SPINDLE MOTOR: ---------------- 10 HP AC TURRET TYPE: ------- 30mm VDI 12 STATION DIMENSIONS APPROX----------90" X 72" X 72"H WEIGHT APPROX------------------ 7500 LBS EQUIPPED WITH: FANUC 18T 32-BIT CNC CONTROL WITH 9" CRT RS-232C PORT INTERFACE FOR DNC OPERATION

[MFR] HARDINGE

[Model] CS-GT

[Year]

F-0T φ310 6000rpm X-300 Z-300 Air chuck

[MFR] HARDINGE

[Model] VMC-600 II

[Year] 2003

TABLE SIZE 29.5" x 20" MAXIMUM TABLE LOAD 1540 LBS SPINDLE NOSE TO TABLE TOP 4.1" - 26.1" X AXIS TRAVEL 23.6" Y AXIS TRAVEL 20.1" Z AXIS TRAVEL 20.1" SPINDLE SPEED RANGE 0 - 8000 RPM RAPID TRAVERSE RATE X Y & Z AXES 1181 IPM CUTTING FEED RATE 0.1 - 590 IPM SPINDLE TAPER CAT 40 SPINDLE MOTOR 17.3 HP TOOL CHANGER CAPACITY SIDE-MOUNT 24 STATIONS TOOL-CHANGE TIME 2.5 SECONDS MAXIMUM TOOL WEIGHT 13.2 LBS WEIGHT APPROX. 10,000 LBS DIMENSIONS APPROX. 86"L x 93"W x 101"H FANUC Oi-M CNC CONTROL w/COLOR LCD DISPLAY, RS-232C PORT INTERFACE FOR DNC OPERATION, RIGID TAPPING (SYNCHRONOUS / SOLID TAPPING), w/LOOKAHEAD FOR HIGH SPEED MACHINING, REMOTE JOG HANDLE PRE-WIRED FOR 4TH AXIS, w/SIDE-MOUNT SWING ARM TOOL CHANGER OPTION, SURROUND TOOL COOLANT w/5 ADJ. SPINDLE PORTS, COOLANT SYSTEM WITH TANK & PUMP, FULLY ENCLOSED GUARDING ALL AVAILABLE MANUALS,

[MFR] HARDINGE

[Model] HLV-H

[Year] 1976

Spindle Capacity: Round 5C Collets..................1-1/16" Hexagon 5C Collets................7/8" Square 5C Collets.................3/4" Step Chuck........................6" Jaw Chuck.........................5" Expanding Collets.................3" Swing Over Bed....................11" Swing Over Cross Slide............9" Distance Between Centers..........18" Spindle Bore......................1-1/4" Spindle Speeds....................125 - 3,000 RPM (Variable) Carriage Feed Range...............5/16 - 7 IPM Cross Slide Feed Range............3/16 - 4 IPM Compound Travel...................3" Cross Slide Travel................5-1/2" Inch Threading....................(36) 11 - 108 TPI Metric Threading..................(35) 0.4375 - 2.7 mm Electrics.........................460v 3 Phase Dimensions........................72" x 29" x 66" 2,500 Lbs

[MFR] HARDINGE

[Model] HLV-H

[Year]

SELLER : Amiron Machines

ID:#1296

[MFR] HARDINGE

[Model] HC

[Year]

Turret tool post

{{ contactModal.id }} {{ contactModal.companyname }} {{ contactModal.title }} {{ contactModal.stockCode }} {{ contactModal.telephone }} {{ contactModal.inCharge }}
prev Next