- HOME
- Select Manufacturer
- MITSUBISHI
MITSUBISHI Product List
1 ~ 50 of 67 POST


[MFR] MITSUBISHI
[Model] MALC-12A
[Year] 1991
Control system: Mitsubishi Country of origin: Japan Number of axis: 2 Chuck size: 380 mm X axis travel: 265 mm Z axis travel: 1550 mm Spindle speed: 20~2200 rpm Tool storage capacity: 12 pcs ATC: Yes Spindle drive motor: 22/30 kW Machine weight: 9 ton Dimension (LxWxH): 2.3x3.8x2.2 m

[MFR] MITSUBISHI
[Model] M-V50-FM
[Year] 2002
NC:FANUC 16i-MB ATC with 24 HSK-F63 T:1000*510 30000rpm S:800*510*450 X.Y.Z Linear Scale automatic tool length measuring Cutting fluid temperature control device Through-Spindle Coolant Spray Gun Chip Conveyer Mist Collector chip bucket

[MFR] MITSUBISHI
[Model] M-V50D
[Year] 1997
MELDAS 520AM T: 1100 * 500 T load capacity: 800kg Main axis NT No.50 Tool shank MAS BT50 ATC24 Power capacity: 28kVA

[MFR] MITSUBISHI
[Model] TW-1268
[Year] 2009
Travel X axis (Longitudinal) 1200 (48") Y axis (Cross) 680 (26.3") Z axis (Vertical) 610 (24") Spindle nose to table surface 125-725 (5" - 28.5") Spindle center to column surface 720 (28.3") Table Table dimension 600 �~ 1500 (23.6"�~ 59") T-slots (wide �~ no. �~pitch) 18 (0.70") �~ 5 �~ 100 (3.94") Table height from the floor 860 (33.8") Table load capacity 1200kgs (2640lbs) Headstock Spindle nose (BT/CAT/ISO) #40 taper / #50 taper Spindle RPM (#40 taper) 6,000 / 8,000 (opt.) Spindle RPM (#50 taper) 4,500 / 6,000 (opt.) Feedrate Rapid traverse for X Y Z axis 15000 mm./.min (600 ipm) Cutting feed for X Y Z axis 1-10000 mm./.min (0.04-400 ipm) Motors Main motor #40 (cont./30min) 7.5Kw / 11K Main motor #50 (cont./30min) 11Kw / 15Kw AC servo motor for each axis 2Kw-14NW / 3.5Kw-22NM (opt.) Coolant system 580W Lubrication system 25W Chiller system 850W for spindle over 8,000RPM Automatic tool changer Magazine for armless type 16 / 20 tools Magazine for arm type 24 / 32 /40 tools Max. tool diameter #40: 70 / 127 (3"/5") #50:125 / 180 (5"/7") Max. tool length #40:300 (11.8") #50:350 (13.8") Max. tool weight #40 : 7 kgs (15lbs) #50 : 15kgs (33lbs) Accuracy Positioning �}0.005 mm / �}0.0002" Repeatability �}0.005 mm / �}0.0002" General information Air pressure 5Kg / cm? over Machine weight 6500 (14300 lbs) Floor space (L �~ W �~ H) 3200 �~ 3300 �~ 2800 (126" �~ 130" �~ 110")

[MFR] MITSUBISHI
[Model] V360
[Year] 2000
S 510×360×460 T 630×360 60-2000min-1 BT40 ATC12

[MFR] MITSUBISHI
[Model] M-H60D
[Year] 1996
Meldas-520M T:630x630mm X1000 Y800 Z800mm ATC:120 B:0.001degree

[MFR] MITSUBISHI
[Model] M-H80EN
[Year] 2002
Fanuc-18iM T:800x800mm 2APC 3200rpm ATC80 BT50 S:X1250*Y1000*Z850mm B:NC Rotary Chip conveyor Thru spindle

[MFR] MITSUBISHI
[Model] M-H80E【Sold out】
[Year] 1998
Control:Fanuc-18MB(XYZB-axis) Table:800x800x2APC, B-axis:1°Indexing Table laoding capacity:2000kg Travels:XYZ:1250x1000x850 Spindle:6000rpm BT50 ATC40 ・Linear scale feedback(XYZ) ・Automatic Centering of workplaces and measurement ・Automatic Tool’s length measuring

[MFR] MITSUBISHI
[Model] M-VR30【Sold out】
[Year] 2004
Control:Fanuc-18iMB(XYZW) Effective distance between column:2550 Table:2000 x5000 Table Loading capacity:30,000kg Trevel(XYZW):5200x3000x700x800 Distance from table top to Spindle end:1650 Spindle:6000rpm BT50 ATC100 Right Angle head Spindle:6000rpm (5°Indexing) ・Linear scare feedback(XYZ) ・Helical Interpolation ・Three dimensional Rigid tapping
[MFR] MITSUBISHI
[Model] M-VS25/20
[Year] 2001
FANUC-18MB Between Column:2500mm T:2000×4000mm Stroke (X, Y, Z): 4200 x 2500 x 1600mm 8000rpm ATC60 2APC

[MFR] MITSUBISHI
[Model] PD32-B32P
[Year] 2006
Fanuc 21i-TB Swing : 320 Between centers : 320mm Wheel diameter: 510mm Overhaul is finished

[MFR] MITSUBISHI
[Model] RB35-H150A
[Year] 1993
CNC Angular Wheelhead Grinder MITSUBISHI FANUC center:1500mm

[MFR] MITSUBISHI
[Model] RD32-B50A
[Year] 2001
OSP MELDAS swing φ320 center 500mm Maximum Processing diameter φ300 whetstone φ455*φ152.4*75 whetstone rotation speed 1888min-1 10~500min-1 MT NO.4 whetstone motor5.5kW AC220/200±10% 60/50Hz 20KVA

[MFR] MITSUBISHI
[Model] MAF-RS150B
[Year] 1994
Fanuc-15M dia φ150mm X7000 Y3250 Z700 W900mm 1200rpm BT50 ATC60 Spindle motor:VAC30/37kw

[MFR] MITSUBISHI
[Model] GE25A
[Year] 2014
DRY CUT Fanuc-31iA Max Work dia:250mm Max. cutting module 6

[MFR] MITSUBISHI
[Model] SD15
[Year] 2011
Fanuc21i-MB ring loader NC4axis straight SD15567C4

[MFR] MITSUBISHI
[Model] SD25
[Year] 2003
25160C4 NC4axis Straight Fanuc Ring loader


[MFR] MITSUBISHI
[Model] SD25
[Year] 2002
Fancu21i-M NC4aixs helical 25139C4 M6 ring loader tip conveyer

[MFR] MITSUBISHI
[Model] SE15
[Year] 2013
Fanuc32i-Model A NC 4axis straight Ring loader SE15125C4

[MFR] MITSUBISHI
[Model] SE15A
[Year] 2012
Fanuc32i-Model A NC 4axis straight Ring loader SE15066C4

[MFR] MITSUBISHI
[Model] SE15A
[Year] 2012
Fanuc32i-Model A NC 4axis helical Ring loader SE15068C4

[MFR] MITSUBISHI
[Model] SE15A
[Year] 2012
Fanuc32i-Model A NC 4axis helical Ring loader SE15067C4

[MFR] MITSUBISHI
[Model] FD30
[Year] 2003
Fanuc18i-MB NC4Axis Travers(conventional and diagonal) crowning,tapering

[MFR] MITSUBISHI
[Model] FD30
[Year] 2002
30615C4 Fanuc21i-M φ310 M8 NC4axis traverse (conventional diagonal) taper、crowning


[MFR] MITSUBISHI
[Model] FE30A
[Year] 2014
Fanuc-32iA Max. work piece dia:310mm Max. cutting module:8 Max.distance between centers:575mm



[MFR] MITSUBISHI
[Model] GH-300
[Year]
Max Dia 315 Max Module 8 Two auto cycle, Auto hob shift auto hydraulic support lift hob spindle speed 100~400 main motor 7.5kw machine weight 7600kg


[MFR] MITSUBISHI
[Model] PE-150
[Year]
# 0846 MITSUBISHI JAPAN 18170453 "MODEL: PE-150 Cap: 150T, Stroke: 500mm, Bed Size: 1500 x 950mm, Ram Size: 1500 x 750mm, Day Light: 900mm, Power Req. kva FB: 6'-0"" LR: 9'-7"" HT: 15'-5"" With Die Cushion"

[MFR] MITSUBISHI
[Model] 80MSV
[Year] 2005
Mitsubishi 80t Used Plastic Injection Molding Machine Model: 80MSV Tonnage: 80t Tie bar spacing: 380x380mm Screw diameter: 25mm Year: 2005. Injection Capacity: 68cm^3. Opening Stroke: 430mm. Daylight Opening(Max): 610mm Machine is in good working condition. Interested buyers are welcome to inspect and test run machine in our warehouse.

[MFR] MITSUBISHI
[Model] 450MSG
[Year] 2005
Mitsubishi 450t used plastic injection molding machine Youtube Video: https://youtu.be/RYuTeMD8Qas Model: 450MSG Tie bar distance: 820x820mm. Screw diameter: 50mm. Shot weight: 700g. Year: 2005. Opening stroke: 1050mm. Daylight Opening(max): 1400mm Machines are in good running condition. Interested buyers are welcome to inspect machines anytime in our warehouse. Daxin Machinery -Over 200 units of used injection molding machines in stock -All can be inspected in the same warehouse under one roof -All can be powered on for test-run in working condition sales@daxin88.com Skype: daxin-machinery Mobile: +8613509620296 (whatsapp) / +6596479097 (WeChat) www.daxin88.com / www.daxin-machinery.com Follow Daxin Machinery: Facebook Twitter Google+ LinkedIn Youtube.

[MFR] MITSUBISHI
[Model] 550MG?
[Year] 1998
Mitsubishi Used Plastic Injection Molding Machine Youtube Video: https://youtu.be/YO7w6dw8rV4 Model: 550MG?. Tie bar distance: 860x860mm. Screw diameter: 78mm. Manufacture year: 1998. Machine is in good working condition. Interested buyers are welcome to inspect machine anytime. Daxin Machinery -Over 200 units of used injection molding machines in stock -All can be inspected in the same warehouse under one roof -All can be powered on for test-run in working condition sales@daxin88.com Skype: daxin-machinery Mobile: +8613509620296 (whatsapp) / +6596479097 (WeChat) www.daxin88.com / www.daxin-machinery.com Follow Daxin Machinery: Facebook Twitter Google+ LinkedIn Youtube.

[MFR] MITSUBISHI
[Model] 650MM?
[Year] 1999
Mitsubishi Used Plastic Injection Molding Machine Youtube Video: https://youtu.be/hrDKARJ6-Pk Model: 650MM? Tie bar spacing: 1080x1080mm Screw diameter: 90mm Injection Volume: 3140cm^3. Year: 1999. Opening Stroke: 1350mm Daylight Opening: 1800mm. Machine is in good working condition. Interested buyers are welcome to inspect and test run machine in our warehouse. Daxin Machinery -Over 200 units of used injection molding machines in stock -All can be inspected in the same warehouse under one roof -All can be powered on for test-run in working condition sales@daxin88.com Skype: daxin-machinery Mobile: +8613509620296 (whatsapp) / +6596479097 (WeChat) www.daxin88.com / www.daxin-machinery.com Follow Daxin Machinery: Facebook Twitter Google+ LinkedIn Youtube.

[MFR] MITSUBISHI
[Model] 850MMG
[Year] 2006
Mitsubishi 850t used injection molding machine. Model: 850MMG. Year: 2006. Screw diameter: 105mm. Tie bar spacing: 1080x1080mm. Injection Capacity: 4540cm^3. Motor Capacity: 2x75kw. Clamp Stroke: 1250mm Daylight Opening(Max): 2280mm. Machine is in good working condition. Interested buyer can make an inspection on it.

[MFR] MITSUBISHI
[Model] 1300MMV-160
[Year] 2011
Mitsubishi 1300t used injection molding machine. Tie bar spacing: 1320x1280mm. Screw diameter: 100mm. Injection volume: 4540cm^3. Mould thickness: 700~1200mm. Clamp stroke: 1800mm. Machine is in very good running condition. Interested customer is welcome to inspect and test run machine.

[MFR] MITSUBISHI
[Model] 1600MM?
[Year] 1999
Mitsubishi 1600t used plastic injection molding machine for sale. Model: 1600MM?. Year of manufacture: 1999. Screw diameter:135mm. Tie bar spacing: 1560x1320mm. Youtube Video: https://youtu.be/msOHSC6C9ZA Machine is in good working condition,kept in our warehouse at ShenZhen of China very near HongKong and GuangZhou. Interested customers can visit us to power on machines for test-run. Daxin Machinery -Over 200 units of used injection molding machines in stock -All can be inspected in the same warehouse under one roof -All can be powered on for test-run in working condition sales@daxin88.com Skype: daxin-machinery Mobile: +8613509620296 (whatsapp) / +6596479097 (WeChat) www.daxin88.com / www.daxin-machinery.com Follow Daxin Machinery: Facebook Twitter Google+ LinkedIn Youtube.

[MFR] MITSUBISHI
[Model] 2000MM?
[Year] 2004
Running hour: 11693 hour Screw diameter: 135mm Shot weight: 9500g Tie bar spacing: 1600x1800mm Maximum mould thickness: 1500mm Minimum mould thickness: 800mm Clamping Stroke: 2400mm Daylight Opening (Max): 3200mm



[MFR] MITSUBISHI
[Model] S12A2-T2MPTK
[Year]
Mitsubishi Marine Engine Model: S12A2-T2MPTK Power: 701kW/1800RPM Condition: New Code: 454 Power: 701kW/940HP RPM: 1800RPM Ref.no: Views: 779 l??t 12-cylinder 4-cycle Water cooled Diesel Engine Direct-injection Turbocharged with Air-cooler Built-up Heat Exchanger & Sea water pump. Bore*Stroke (mm): 150*160 Displacement (L): 33.93

[MFR] MITSUBISHI
[Model] S12R-MPTA
[Year]
Mitsubishi Marine Engine Model: S12R-MPTA SN #: 13500 Power: 880kW Speed: 1600rpm

[MFR] MITSUBISHI
[Model] S12R-T2MPTK
[Year]
Code: 455 Power: 940kW/1261HP RPM: 1600RPM Ref.no: Views: 920 l??t 12-cylinder 4-cycle Water cooled Diesel Engine Direct-injection Turbocharged with Air-cooler Built-up Heat Exchanger & Sea water pump. Bore*Stroke (mm): 170*180 Displacement (L): 49.03 Model: S12R-T2MPTK Power: 940kW/1600RPM Condition: New

[MFR] MITSUBISHI
[Model] S16R-PTA
[Year] 2006
SN #544595 Power:1480 kW / 1500 RPM Frequency:60Hz Apms:150 Phase:3 Voltage:400 Year built:8/2006 Quantity:1 Made in France

[MFR] MITSUBISHI
[Model] S16R-T2MPTK
[Year]
Code: 456 Power: 1250kW/1676HP RPM: 1600RPM Ref.no: Views: 813 l??t 16-cylinder 4-cycle Water cooled Diesel Engine Direct-injection Turbocharged with Air-cooler Built-up Heat Exchanger & Sea water pump. Bore*Stroke (mm): 170*180 Displacement (L): 65.37 Model: S16R-T2MPTK Power: 1250kW/1600RPM Condition: New