TOSHIBA Product List

SEARCH FILTER

1 ~ 50 of 73 POST

[MFR]TOSHIBA

[Model]TBJ-10BNC

[Year]

※The general-purpose machine is modified to NC. FANUC-0T 3-jaw hydraulic chuck:φ1000 Turret:4-corner turret method Processing range:φ260-700

[MFR]TOSHIBA

[Model]TSN-10A

[Year]1972

※The general-purpose machine has been modified to NC. FANUC-0T Table diameter:1,000 Maximum workpiece diameter:1,250 Chuck:φ1000 XZ:750*630 Turret: 4-corner turret method Processing range:φ500~900

[MFR]TOSHIBA

[Model]TUD-16

[Year]2001

F-150T-B φ2000*1800 ATC-12 4 jaw chuck φ1600 1-300rpm 55Kw Max load:10,000Kg  Rotation force:21,570Nm Cutting force:30,000N S:X1925*Z1500 Cross-500 High column 250mm X-axis scale feedback Memory 1280m Common variables 600sets Through tool coolant 27psi Program 1000sets Table index Auto work measurement ATC Jib crane

[MFR]TOSHIBA

[Model]TUE-100(S)

[Year]2018

CNCVertical Boring and Turning Mill Machining time:46H Control:Fanuc-0i-TF (XZC) Table:φ1016、 Speed: 600rpm Max swing:φ1,200、 Max. Load on table: 2,000kg Max. cutting diameterxheight:φ1,200x850 Ram spindle:3,000rpm, BT50, ATC18(Turning6+Milling12) Travel:XZ:-510〜750×800 Table top to ram bottom: 1055 ・Linear scare feed back(X-axis) ・High pressure through spindle coolnat(7MPa) ・Automatic diameter and step measuring device ・Automatic tool knife edge measuring device ・Chip-conveyor ・With too holders 4unit

[MFR]TOSHIBA

[Model]TUE-150

[Year]2009

FANUC-0iTC T:1600 Turning:2~320 Swing:2000 Gate height:1720 Stroke:X-100~1150Z900W1000 Tooling:BT50 ATC-12 Chip conveyor

[MFR]TOSHIBA

[Model]BMC 80

[Year]1987

EUR 35000

4-axis HMC New 1987 Ss9rzc CNC Tosnuc Travels(XYZ):1.600*1000*1120 Number of paletts 2 st 800 x 800 mm Full B Axis Max weight on palet 2.000kg Max spindelspeeds 3000 rpm Toolchanger 60 tools Rehishaw Toolmeasuring Workpiece measuring

ID:#5765

[MFR]TOSHIBA

[Model]BMC-100 BMC-80

[Year]

BMC-100 table:1000×1000 XYZ:2000×1120×1000 positioning-inductosyn(feed back) table index 5° 20~4500rpm BT50 FANUC 0IMD ATC45 ----------------------------- BMC-80 Table:800×800 2APC 60ATC XYZ:1000×900×800 FANUC 0IMD Spindle Speeds 20~4500rpm

[MFR]TOSHIBA

[Model]BMC-1000(B)

[Year]2007

Controller:TOSNUC-888 Table size:1000×1000 mm Travel X:2000 Y:1500 Z:1200 mm Distance from pallet to spindle nose:200-1400 mm Table indexing:1° Max. loading weight:2500 kg Number of pallets:2 APC Spindle taper:BT50 Spindle speed:15-5,000 rpm ATC:90 stations Required floor space:5535×7870 mm  Machine height:3825 mm Machine weight:22000 kg Travel extension (X: 1600→2000 Y: 1250→1500mm) Coolant tank with rising scraper conveyor High-output spindle AC30kW (30 min.) / 22kW (Continuous operation) Coolant through spindle 1.9MPa (Spec. for high-pressure coolant [DIN]) Linear scale feedback (X, Y, Z axis) Program memory capacity 1200M (1024) Tool length offset total 499 Tool diameter offset total 499 Programable mirror image

ID:#12741

[MFR]TOSHIBA

[Model]MPF-10(5C)

[Year]2003

TOSNUC 888.2 ATC 40 tools BT50 BIGPLUS Table 1300*1000 12000rpm Gate Width 1600 Stroke(XYZA):1000*1600*600*±30 Gate Height 900 C-axis 0.0001 Indexing Z Scale feedback

ID:#5647

[MFR]TOSHIBA

[Model]MPF-3116DS

[Year]2003

Tosnuc-888-2 Gate width:3100 T:1600*2800 ATC-24 Spindle turning speed:10000rpm Tooling

[MFR]TOSHIBA

[Model]UHG-130C

[Year]2000

Horizontal type

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1997

Horizontal type S/NO.981315

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1996

Horizontal type S/NO.981262

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1996

Horizontal type S/NO.981274

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1996

Horizontal type S/NO.981273

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1996

Horizontal type S/NO.981227

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1996

Horizontal type S/NO.981240

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1994

Horizontal type S/NO.981033

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1993

Horizontal type

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1995

Horizontal axis Fanuc-0M T:φ150 Grindstone diameter:φ150 3kw 12000rpm Air static pressure

[MFR]TOSHIBA

[Model]BP-13B

[Year]

1500x2300x4000mm

[MFR]TOSHIBA

[Model]BTD-110.R16[Sold out]

[Year]2003

Control:TOSNUC-888 SpindleDia.:φ110 Table:1,400×1,600,   B-axis: 0.0001° Loading capacity: 10,000kg(Option)  Travel:XYZW:2,000×1,500×1,450×500 Spindle: 3,000rpm、 BT50, ATC38 ・ Through-spindle coolant set ・ Scale feedback(X,Y,Z,B) ・ manual centering function & tool length measuring function  ・Helical Interpolation  ・Synchronized tapping ・ Arbitrary angle chamfer corner R 

[MFR]TOSHIBA

[Model]BTD-200Q

[Year]1990

TOSNUC 777

[MFR]TOSHIBA

[Model]BTD-200QF

[Year]2000

TOSNUC T-888 S(XYZ):1,500*1,000*700 B:0.0001 T:1,000x1,000mm 2APC 3,000rpm BT50 ATC60

[MFR]TOSHIBA

[Model]BTD-200QH[Sold out]

[Year]2016

Control:TOSNUC-999 Rotating spindle diameter:φ110 Extended quill diameter:φ200 Table:1200×1000, B-Axis: 0.0001° Table loading capacity:4,000kg Spindle speed:3,000rpm, BT50, ATC30 Travel:XYZW:1500×1200×700×400  Distance from table to spindle gage plane:450〜1150 ・ Helical interpolation ・Synchronized tapping ・Optional angle chamfering ・ Manual centering fuction  ・Manual tool length/Tool diameter measurement ・ Lift chip-conveyor

[MFR]TOSHIBA

[Model]BTH-130 R18

[Year]2011

Tosnuc999 dia130mm BT50 2500rpm  T:1400×1800 B:0.0001 S(X/Y/Z/W):2500×2000×1500×700 ATC:60 thru spindle

[MFR]TOSHIBA

[Model]TB-14

[Year]1962

Turning machine Table:φ1400

[MFR]TOSHIBA

[Model]TD-40/ 65S

[Year]1996

φ6500 T:φ4000 4 jaw chuck 0.8~40rpm(18steps) AC75kw(Invertor) Table load:50t Rotation force: 16t・m Table to under cross rail: 4000mm Square Ram stroke:1600(Vertical) Ram right & left angle:30° Slant cutting angle:60° MIL head:25~630rpm Machine height:9100h Weight:73t 1996 year Electric O/H

[MFR]TOSHIBA

[Model]UHG-130C

[Year]1996

Horizontal type S/NO.981222

[MFR]TOSHIBA

[Model]KRT-8D

[Year]

[MFR]TOSHIBA

[Model]

[Year]

Table:φ1000mm

[MFR]TOSHIBA

[Model]DPN-13B

[Year]

JPY 77,000

200V

[MFR]TOSHIBA

[Model]DPN-13B

[Year]

Drilling:Iron φ13 Wood φ24 245-2630rpm(12steps)

[MFR]TOSHIBA

[Model]BFT-13W2

[Year]

Main shaft diameter (mm): 130 Taper hole: Morse No. 6 Milling axis diameter (mm): 225 Spindle speed (number of stages): 27 High speed range (RPM): 230-1200 Medium speed range (RPM): 50-250 Low speed range (RPM): 9-46 Rapid feed rate (mm/min): 3200 Creep feed rate (mm/min): 6 Traction motor output (KW): 185 Spindle feeding length (mm): 900 Vertical movement of spindle head (mm): 1500 Outer support vertical movement amount (mm): 1500 Table maximum loading weight (Kg): 10000 Height from top surface of the table to bottom surface of the bed (mm): 1050 Machine height (mm): 4200

SELLER :W & N

ID:#13042

[MFR]TOSHIBA

[Model]BT-8C

[Year]

SELLER :Wongtanawoot

ID:#737

[MFR]TOSHIBA

[Model]BT&BR

[Year]

SELLER :Wongtanawoot

ID:#736

[MFR]TOSHIBA

[Model]BR-20/25B(TF)-15

[Year]

Table size 2000×2500 load on table 20Ton Table weight 15Ton

[MFR]TOSHIBA

[Model]BR-20/25B(TF)-15

[Year]

2000*2500 V-1500

[MFR]TOSHIBA

[Model]-

[Year]

[MFR]TOSHIBA

[Model]DAL 250 CSVS2

[Year]1982

Serial No. : 841856

[MFR]TOSHIBA

[Model]IS55FP

[Year]2003

Screw diameter:135mm. Tie bar spacing:310x310mm. Machine has variable pump and S10 controller. It is in good running condition. Interested customer is welcome to visit our warehouse to inspect and test run the machine

[MFR]TOSHIBA

[Model]IS80EPN-3A

[Year]1988

BRAND : TOSHIBA Model : IS80EPN-3A Specifications Capacity : 80TON Year : 1988 Made in : JAPAN Location : INDONESIA Qty : 2 UNITS

ID:#77

[MFR]TOSHIBA

[Model]IS80GN

[Year]2006

Screw diameter: 32mm Tie bar spacing: 380mm

[MFR]TOSHIBA

[Model]IS100GN-5B

[Year]2003

Toshiba 100t used plastic injection molding machine. Youtube: https://youtu.be/oDW-wTCqsck Model: IS100GN-5B. Year of manufacture: 2003. Screw diameter:36mm Tie bar spacing:460*460mm Several units available Machines are in good running condition Interested customer is welcome to inspect and test run machines Machines are made in Japan

[MFR]TOSHIBA

[Model]IS130GN

[Year]2003

Toshiba 130t used plastic injection molding machine. Model: IS130GN. Year: 2003. Screw diameter: 45mm. Shot weight: 250g. Tie bar spacing: 510x510mm. Opening Stroke: 625mm. Daylight opening(max): 830mm. Machine is in good running condition interested buyer can inspect and test machine running. Daxin Machinery -Over 200 units of used injection molding machines in stock -All can be inspected in the same warehouse under one roof -All can be powered on for test-run in working condition sales@daxin88.com Skype: daxin-machinery Mobile: +8613509620296 (whatsapp) / +6596479097 (WeChat) www.daxin88.com / www.daxin-machinery.com Follow Daxin Machinery: Facebook Twitter Google+ LinkedIn Youtube.

[MFR]TOSHIBA

[Model]IS170F-5A

[Year]

BRAND : TOSHIBA Model : IS170F-5A Specifications Capacity : 170TON Year : 1989 Made in : JAPAN Location : INDONESIA Qty : 1 UNIT

ID:#83

[MFR]TOSHIBA

[Model]IS170GN

[Year]2003

Toshiba 170t used injection molding machine. Model: IS170GN. Year: 2003. Screw diameter: 40/46mm. Tie bar spacing: 510x510mm. Injection Volume: 250/330g. Opening Stroke: 700mm. Daylight opening (max): 920mm. Machines are in good running condition. Interested buyer is welcome to test machine running. Daxin Machinery -Over 200 units of used injection molding machines in stock -All can be inspected in the same warehouse under one roof -All can be powered on for test-run in working condition sales@daxin88.com Skype: daxin-machinery Mobile: +8613509620296 (whatsapp) / +6596479097 (WeChat) www.daxin88.com / www.daxin-machinery.com Follow Daxin Machinery: Facebook Twitter Google+ LinkedIn Youtube.

[MFR]TOSHIBA

[Model]IS220GN

[Year]2004

Tie bar distance:560mm. Manufacture year: 2003-2006. Screw diameter: 50mm A few units available

[MFR]TOSHIBA

[Model]IS280GS

[Year]2003

Visit us after Chinaplas or Canton Fair! Toshiba 280t used plastic injection molding machine Youtube Video: https://youtu.be/59Ze-iYi4j4 Model: IS280GS Tie bar distance: 610x610mm. Screw diameter: 60mm. Manufacture year :2003. Machine is in very good working condition. Interested buyers are welcome to inspect machine anytime in our warehouse.

[MFR]TOSHIBA

[Model]IS350E-17A

[Year]1989

BRAND : TOSHIBA Model : IS350E-17A Specifications Capacity : 350TON Year : 1989 Made in : JAPAN Location : INDONESIA Qty : 1 UNIT

ID:#84

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}
prevNext