TSUGAMI Product List

SEARCH FILTER

1 ~ 21 of 21 POST

[MFR]TSUGAMI

[Model]NU4Y

[Year]

Multifunctional type Fanuc-10T Y-axis C-axis Number of rotary tools 3550rpm S:135*100*190 Spindle inner diameter:φ53 Max processing length:250 12-station turret

[MFR]TSUGAMI

[Model]BS18

[Year]1997

2.5m Bar feeder

[MFR]TSUGAMI

[Model]BS20

[Year]

-

[MFR]TSUGAMI

[Model]FA-65

[Year]

Spindle turning speed:40~4000rpm S:(1)X160*Z400*Y±50 S(2):X100*Z190 Turret:T1 for 14-station / T2 for 8-station

[MFR]TSUGAMI

[Model]TMA-8C-III

[Year]

Control Fanuc Series 18i-TB Max Turning Diameter 8.66" Max. Bar Diameter 2.56" Max Work Length 22.83" X-Axis Travel 16.93" Y-Axis Travel 5.12" Z-Axis Travel 22.81 C-Axis 360 deg A-Axis 25.98"

[MFR]TSUGAMI

[Model]TMA8(C)

[Year]2000

F LH1(Base:F 18iTA) S430*120(±60)*400+165mm(main work spindle) 35~7000min-1 0.001° 8" chuck Main spindle bearing inner diameter: front 100 mm/rear 90mm Main axis minimum indexing angle 0.001° 6" collet chuck B axis indexing angle 0~180° ATC30 Tool maximum diameter: 60 mm axis:4 Tool holder type: with ATC 1 spindle B axis indexing angle: 0 to 180 ° B axis minimum indexing angle:1

[MFR]TSUGAMI

[Model]VMA1-III

[Year]2008

Fanuc-0iMC 2000rpm X200 Y200 Z250mm BT15 ATC20 T:400x200mm

[MFR]TSUGAMI

[Model]G18SB

[Year]2007

Swing : Ф180 Between Centers : 250mm Fanuc Series 21i-TB Automatic Loading is available.

ID:#13186

[MFR]TSUGAMI

[Model]UG18A

[Year]1997

distance between centers:150 shake:180 Maximum processing diameter:50 Whetstone:Outer diameter355*width 50* inner diameter 127 Spindle rotational speed: 50~1400min-1 Spindle:MT No. 2 Table turning angle:± 1 ° Coolant tank:150L

[MFR]TSUGAMI

[Model]R17NCA2A

[Year]2010

Fanuc21iMB 2008,2011,2012

ID:#4691

[MFR]TSUGAMI

[Model]T-SPL1

[Year]

3 claws 6 inch chuck Bed swing:320 On the carriage swing:160 center:750~800 spindle hole throgh:35 125~3000rpm

[MFR]TSUGAMI

[Model]T-IGD150

[Year]1984

Spindle turning speed:190,310,515,850,1400rpm Max movement amount of the table horizontal feed: manual 150mm auto 80mm Max turning angle of the table:±4.5° Auto table feeding speed(3 steps):110-2700mm/min Max movement amount of the wheel base to front & back:30mm Max turning angle of the wheel base:±90°

[MFR]TSUGAMI

[Model]GU4A

[Year]1991

φ150x450mm

[MFR]TSUGAMI

[Model]T-CGD150

[Year]1960

Turning speed:5000-6000rpm Spindle turning speed:190,310,515,850,1400rpm Max workpiece diameter:φ35 Minimum φ0.8mm Distance between center:150mm Max movement amount of the table horizontal feed: manual 150mm auto 80mm Max turning angle of the table:±4.5° Auto table feeding speed(3 steps):50-1120mm/min Max movement amount of the wheel base to front & back:30mm Max turning angle of the wheel base:±90°

[MFR]TSUGAMI

[Model]T-CGU250

[Year]

Spindle tuning speed:140~700rpm Work length:200

[MFR]TSUGAMI

[Model]R-10A

[Year]

Capacity:M45*60 Roll diceφ150×40、60 38、58rpm With dice

[MFR]TSUGAMI

[Model]R6A

[Year]2000

6t Capacity: 3 - 45 mm Die length: 60 mm

[MFR]TSUGAMI

[Model]S-ROL5D

[Year]

[MFR]TSUGAMI

[Model]T-ROL15

[Year]1973

Thread out Dia Meter (Min-Max): 5 - 75 mm Max.Thread Length: 147 mm

[MFR]TSUGAMI

[Model]

[Year]

SELLER :Wongtanawoot

ID:#752

[MFR]TSUGAMI

[Model]1091

[Year]

φ800

{{ contactModal.id }}{{ contactModal.companyname }}{{ contactModal.title }}{{ contactModal.stockCode }}{{ contactModal.telephone }}{{ contactModal.inCharge }}
prevNext