- HOME
- Select Manufacturer
- DAINICHI KINZOKU KOGYO
DAINICHI KINZOKU KOGYO Product List
1 ～ 12 of 12 POST
[MFR]DAINICHI
[Model]BX105-150
[Year]1998
【❖Take a look at our video!❖】 F18T 18"Hydraulic chuck Hole through:φ320 Bed Swing:φ1050 cross slide swing 900 Work length:1500 Tail cup XZ:510*1500 2～500min-1 V12 ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]DAINICHI
[Model]DL120x500
[Year]1997
Fanuc-20T Chuck: 24" 4jaws swing over bed: 1,200mm Swing over carriage:800mm Center 5,000mm
[MFR]DAINICHI
[Model]DL53-150
[Year]1997
[MFR]DAINICHI
[Model]DL530×100
[Year]2007
Simple NC lathe FANUC20i-TB KITAGAWA JN12 chuck Swing on the bed:530 Swing on the carriage:300 Center distance:1000 Maximum processing diameter:530mm processing length:1000mm Support weight between both centers:1000kg 17～1700min-1 X*Z:342*1058 Bed width * length:370*2290mm ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]DAINICHI
[Model]DL530×100
[Year]2007
FANUC20i-TB KITAGAWA JN12 chuck Swing on the bed:530mm Swing on the carriage:300mm XZ:342 * 1058mm Center distance:1000mm Support weight between both centers:1000kg Spindle:17～1700min-1 Bed width*length:370*2290mm ※With G code ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]DAINICHI
[Model]DL530x100
[Year]2000
Fanuc-20T 10"chuck Swing over bed:530mm Swing over Carriage:300mm 1700rpm
[MFR]DAINICHI
[Model]MG65×290
[Year]1989
FANUC15T 4-jaw manual chuck V4 Hydraulic cup ✤If there is a discrepancy between the specifications and the actual product, the actual product will prevail.
[MFR]DAINICHI KINZOKU KOGYO
[Model]DLX75A*300
[Year]1996
FANUC-20T 15"chuck Swing: 750 Center: 3000 Hole through spindle: 175Φ Turning speed: 12～900rpm
[MFR]DAINICHI
[Model]DLG-SH63*100
[Year]2020
Overhaul Machine Swing over bed : 630 mm Swing over carriage : 400 mm Bed width : 425 mm Tool shank : JIS A1-6 Spindle bore : 54 mm Max. travel of cross slide : 380 mm Max. travel of upper slide : 200 mm Tailstock spindle taper : Morse taper No.5 Max. travel of tailstock spindle : 200 mm Distance between centers : 1,000 mm Required floor space : 2,851×1,324 mm
[MFR]DAINICHI
[Model]DHK-75×300
[Year]1978
[MFR]DAINICHI
[Model]
[Year]
Swing Over Bed : 640 mm Swing Over Gap : 860 mm Swing Over Carriage : 400 mm Center to Center : 3500 mm
