SELLER PROFILE

DON LEWIS MACHINERY & EQUIPMENT INC. (DLME) Access: 641

1 ~ 20 of 28 POST

[MFR] BOEHRINGER

[Model] V800 15II

[Year] 2012

[Location] California

[Price]

Heavy Duty From Aerospace Landing Gear Company Retrofitted in 2011/12 by Uptime Electronics with: Fanuc Oi-TD Control Swing Over Bed: 52" Distance Between Centers: 120" Spindle Bore: 8" Swing Over Cross Slide: 38" Swing Over Carriage: 44" Maximum Turning Capacity Full Length: 38" Automatic Turret Tool Positions: 8 Equipped With: 31" 4-Jaw Chuck Manual Chuck Steady Rest Boring Bar Holder Chip Conveyor Coolant System Special Features: New Chuck Guard Enclosure

Stock Code:23094

ID:#1476

[MFR] MIGHTY VIPER

[Model] VT-17L

[Year] 2014

[Location] California

[Price]

Stock Code:23073

ID:#1477

[MFR] DOOSAN

[Model] VT1100M

[Year] 2013

[Location] California

[Price]

Low Hours: 1,680 Live Milling Rotary Tool Spindle Speed: 3000 rpm Table Diameter: 39" Maximum Turning Diameter: 43.3" Maximum Turning Length: 39.4" Main Spindle Speed: 850 rpm X-Axis Travel: 22.8" Z-Axis Travel: 39.4" C-Axis Deg. 360 Deg. Rapid Traverse X-Axis: 787.4 ipm Rapid Traverse Z-Axis: 787.4 ipm Number of Automatic Tool Stations: 12 OD Tool Size: 1.3" Boring Bar Diameter: 3.2" Control: Fanuc 32i Model A

Stock Code:23008

ID:#1478

[MFR] FEMCO

[Model] WVL-12

[Year] 1987

[Location] California

[Price]

Table Diameter: 49.21" Maximum Swing: 62.99" Maximum Turning Height: 49.6" Z-Axis Ram Stroke: 39.4" Ram Horizontal Travel: 51" Ram Cross Section: 8.6" x 8.6" Cross Rail Travel: 39.4" Table Speeds: 2.8-280 RPM Table Capacity: 11,000 Lbs. Maximum Torque: 10,845 Ft. Lbs. Spindle Motor Cont./30 Min: 50 HP/ 60HP Control: Fanuc OT

Stock Code:23016

ID:#1479

[MFR] FADAL

[Model] VMC6535-HT

[Year] 2004

[Location] California

[Price]

Features: Full Box Ways Machine Travels X: 65" Travels Y: 35" Travels Z: 30" Spindle RPM: 10,000 RPM Spindle HP: 30 HP Vector Drive Tool Changer: (50) ATC Side Mount Taper: #40 Table Size: 75" x 35" Equipped With: Chip Conveyor Coolant 480 Volt 50/60 Hz 3 Ph Dimensions: 160" long 120" wide 118" tall plus the chip conveyor/coolant tank Weight Approximate: 30,000 Lbs.

Stock Code:23149

ID:#1480

[MFR] HAAS

[Model] VF-3YT/50

[Year] 2011

[Location] California

[Price]

History: Very Clean from local Aerospace Cutting Aluminum. Travels X: 40" Travels Y: 26" Travels Z: 25" Spindle RPM: 10,000 RPM Spindle HP: 40 HP Tool Changer: (30) ATC Side Mount Taper: #50 Table Size: 52" x 23" Equipped With: Haas 4th Axis Probing Chip Auger Coolant Cart 208/230 Volt 50/60 Hz 3 Ph

Stock Code:23146

ID:#1481

[MFR] HAAS

[Model] VF-7D

[Year] 2007

[Location] California

[Price]

History: Very Clean from local Aerospace Cutting Aluminum. Travels X: 84" Travels Y: 32" Travels Z: 30" Spindle RPM: 10,000 RPM Spindle HP: 20 HP Vector Drive Tool Changer: (24) ATC Side Mount Taper: #40 Table Size: 84" x 28" Equipped With: Linear Scales Chip Auger Coolant 208/230 Volt 50/60 Hz 3 Ph

Stock Code:23147

ID:#1482

[MFR] HAAS

[Model] VF3D

[Year] 2007

[Location] California

[Price]

Travels X: 40" Travels Y: 20" Travels Z: 25" Spindle RPM: 10,000 RPM Spindle HP: 20 HP Vector Dual Drive Tool Changer: (24) ATC Side Mount Taper: #40 Table Size: 48" x 18" Equipped With: Wired for 4th Axis Chip Auger Coolant Cart 1MB Program Memory Remote Jog 208/230 Volt 50/60 Hz 3 Ph Dimensions: 123"L x 92"W x 125"H Weight Approximate: 14,000 Lbs.

Stock Code:23138

ID:#1483

[MFR] HAAS

[Model] VF4SS

[Year] 2008

[Location] California

[Price]

Table Size: 52" x 18" X-Axis Travel: 50" Y-Axis Travel: 20" Z-Axis Travel: 25" Spindle Nose to Table Top: 7" to 32" Max. Table Load (evenly distrib.): 1,750 Lbs. Cutting Feed Rate All Axes: 0.1 to 833 i.p.m Spindle Speeds: 12,000 r.p.m. Spindle Taper: Cat-40 Spindle Motor: 30 h.p. Automatic Tool Changer Positions (Side Mount Type): 40 Features: 4th & 5th Axis Ready TSC 300 PSI Wireless Probe P Cool Remote Jog Coolant Filters APC Pallet Shuttle Sidemount Tool Changer

Stock Code:23118

ID:#1484

[MFR] KITAMURA

[Model] Mycenter 3Xif-SP

[Year] 2004

[Location] California

[Price]

Control: Fanuc 16i-MB Table Size 16".1 x 34" X-Axis Travel 29.9" Y-Axis Travel 17.9" Z-Axis Travel 18" Distance Table Surface to Spindle Nose 5.1" to 23.2" Spindle Taper NST40 Rapids 1969 IPM Cutting Feed Rate 0 - 1417 IPM Automatic Too Changer Positions (Side Mount Type) 30 Tool Shank BT40 Max Tool Weight 17.6 Lbs. Tool Change Time 1.2 Seconds Chip to Chip With Tool Orientation 3.2 Seconds Spindle Motor 15 HP Spindle Speeds 10,000 RPM Equipped With: Spark Changer 180 Degree Rotating Pallet Changer

Stock Code:23044

ID:#1485

[MFR] DMG MORI

[Model] NHX4000-II

[Year] 2015

[Location] California

[Price]

Features: Full 4-Axis 1400 Hours Celos Control Pallet Size: (2) 15.7" X-Axis Travel: 22.0" Y-Axis Travel: 22.0" Z-Axis Travel: 26.0" Automatic Tool Changer Positions: 240 Spindle Taper: Cat-40 Spindle Speeds: 15,000 rpm Spindle Motor: 41 h.p. Rapid Travers Rate: X,Y,Z 2362 ipm Pallet Change Time: 8 Seconds Pallet Load Capacity: 880 Lbs. Max. Workpiece Diameter/Height: 24.8" x 34.6" Max. Tool Diameter: 2.7"/6.6" Max. Tool Length: 17.7" Max. Tool Weight: 17.6 Lbs. Spindle Center to Table Top: 2.4" - 24.4" Spindle Nose to Table Center: 2.8" x 28.7" Control: Celos M730 OUM Equipped With: * Full 4th Axis (direct drive rotary table) * High Speed/High Precision Function II * High Output 15,000 rpm Spindle Dual Contact * Through Spindle Coolant * Tool Storage (240) Rack Type * Spindle Chiller * (5) Pallet Edge Locator * "In machine tool measuring" Table Touch Sensor, Metrol. * Add'N of Opt'l Block Skip 2-9 (Soft Key Type) * Add'l Workpiece Coordinate System 48 Sets * Signal Tower 4 layers red yellow green blue * Dry Anchor * Program Resolution Multiplied by 1/10 * Tool Offsets 999 in total * Workpiece Position Compensation for Rotary Axis * Coordinate System Rotation

Stock Code:23116

ID:#1486

[MFR] OKUMA

[Model] MC80

[Year] 1999

[Location] California

[Price]

Pallet Size: 31.5" x 31.5" X-Axis Travel: 49.21" Y-Axis Travel: 39.37" Z-Axis Travel: 33.46" Number of Pallets: 2 B-Axis Rotation: 1�� Indexing Max Load Capacity (with APC): 3,520 Lbs Spindle Speed Range: 10 - 4500 RPM Features: Okuma OSP-7000M CNC Control 120-ATC Automatic Tool Changer #50 Taper Automatic Pallet Changer 220/480V 3 Phase 60Hz Electricals Chip Conveyor Equipped with (4) Pallets one has a Vertical 48"x40" Double T-Slotted Fixture Plate. Dimensions: By Request Weight: Approx: 50,700 Lbs

Stock Code:23145

ID:#1487

[MFR] MOORE

[Model] G18 CNC Series 1000

[Year] 1985

[Location] California

[Price]

Control: CNC G1000 Point to Point Type Table Size: 11" x 24" Travels: 11" x 18" Grinding Wheels: 3/16" to 5" Spindle Speed 40,000 rpm Equipped With: Optional Extension Plate for doing Oversize Holes Mounting Holes for Various Diameter Ranges Dimensions: 120" L-R x 96" F-B x 105" High

Stock Code:23043

ID:#1488

[MFR] HAAS

[Model] HRT-310

[Year] 2008

[Location] California

[Price]

12" Diameter Face Plate Video of it running available

Stock Code:23151

ID:#1489

[MFR] KITAGAWA

[Model] TBX320BE07

[Year] 2012

[Location] California

[Price]

12" Diameter Face Plate Spindle Hole Diameter: 5-1/2" Box Dimensions: 38" x 31" x 25" High Weight Approximate: 1,000 Lbs.

Stock Code:23150

ID:#1490

[MFR]

[Model]

[Year]

[Location] California

[Price]

Universal Cast Iron Matched Set of Precision Angle Plates with Machined T-Slots on Vertical & Horizontal Matching set of angel plates: 39-1/4" x 15-1/2" x 23-1/4" 7 T-Slots on vertical surface 5" Centers 2 T-Slots on top of plate on 5" centers 51" x 43" x 1" thick Aluminum Subplate with some drilled and tapped holes. Approximate Shipping Weight: 500 Lbs.

Stock Code:23110

ID:#1491

[MFR] AMADA

[Model] LC3015-F1NT

[Year]

[Location] California

[Price]

Stock Code:23162

ID:#1492

[MFR] KMT

[Model] BMX 10

[Year] 2010

[Location] California

[Price]

KMT Aqua-Dyne Blastmax Series 50 triplex positive displacement plunger pump system. Designed and manufactured to operate in continuous service at a related flow and pressure. The Series 50 is a compact mobile design pump for applications that require high pressure at lower flow rates such as hydrostatic testing. Equipped with GP VF Series Pump Design Pressure: 10,000 P.S.I. at 80��F Max. Allow. Work Pressure: 10,000 P.S.I. at 80��F. Min. Permissible Temp: 32��F S.O.NO. 442858 Test Pressure 10,000 P.S.I. Pump Spec. No. 61145046 Driver Spec. No. 61146830. Pump S/N 09323022 Driver S/N 409C456103 Wired for 460 Volt 3-Phase 60 Cycle Motor RPM 1575 Pump RPM 420 Comes with Operation and Maintenance Manual

Stock Code:23121

ID:#1493

[MFR] YODER

[Model] No. M2

[Year]

[Location] California

[Price]

36" X 4.5" 10,000# CAP. UNCOIL RECOIL OVERARM SEPARATOR TLNG

Stock Code:6524

ID:#1494

[MFR] KALAMAZOO

[Model] 20 RWF

[Year]

[Location] California

[Price]

Throat Depth:20" Motor:2 H.P. Features: Blade Welder Chip Blower

Stock Code:23085

ID:#1495

< back

{{ contactModal.id }} {{ contactModal.companyname }} {{ contactModal.title }} {{ contactModal.stockCode }} {{ contactModal.telephone }} {{ contactModal.inCharge }}
prev Next